Full CH system prices?

[Scott_D]

What are you roughly charging for a full heating system
8 Rads and a combi
3 Bed house

My ball park is £4-£5000
£4000 mid range boiler and £5000 top end

 

[ShaunCorbs]

Your right I would say (4-6k)

 

[Scott_D]

£2ooo ish labour?

 

[ShaunCorbs]

Yea ish

 

[Harvest Fields]

I’m not quite that pricey. But you get what you pay for. Probably around 4/5

 

[Harvest Fields]

Actually thinking about it your probably about right.

 

[townfanjon]

Yes I would agree , also depends if house is empty with no furnature etc , nothing worse than shifting loads of furnature with nic naks everywhere.
Also the big one is copper or plastic ? , copper for me .

 

[Harvest Fields]

Yes I would agree , also depends if house is empty with no furnature etc , nothing worse than shifting loads of furnature with nic naks everywhere.
Also the big one is copper or plastic ? , copper for me .

Copper all the way mate.

 

[Scott_D]

My last one was plastic.
Cost more on materials but was much faster to install

 

[ShaunCorbs]

My last one was plastic.
Cost more on materials but was much faster to install

Noooo

Wash your mouth out with soap

 

[Scott_D]

If you can't beat em

 

[hammers4spanner]

Most installs I hear of round here are sub 3 k.
Sorry as well I use plastic under floor. Quicker easier and no flaming blow torch near cables

 

[woodsy]

Most installs I hear of round here are sub 3 k.
Sorry as well I use plastic under floor. Quicker easier and no flaming blow torch near cables

Totally agree, just shows the disparity between the north and south. If you tried charging 4-5 grand for central heating round here in a three bed semi, you'd be going hungry and laughed from the house and outta business very quick. Not saying it ain't a fair price but unfortunately as much as I've always tried to hold ground on the right price for the job, prices are low and only been driven lower by the glut of supposed gas engineers / businesses.

 

[SimonG]

6 to 7k but it generally includes an oil tank

 

[Harvest Fields]

Oil? What’s that???

 

[SimonG]

Now here!!!!!!

 

[Harvest Fields]

Nope. No oil here.😛

 

[Old Account]

Most installs I hear of round here are sub 3 k.
Sorry as well I use plastic under floor. Quicker easier and no flaming blow torch near cables

What fitting pushfit under floor? Or do you use compression to copper ?

 

[hammers4spanner]

underfloor speed fit

 

[bert large]

Around 4K for me too for an 8 rad system with a half decent boiler. I'm in the same area as Hammers. As has been said, labour in the region of 2K. Couldn't bring myself to do a full system for 1k labour. Why bother ?