Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "gas safe inspection event" which is posted in Gas Engineers Forum on UK Plumbers Forums.

Yes I have, basically a power point presentation session with a small assessment at the end, all based around IGEM/G/11 unsafe situations procedures.
About 25 fairly local engineers for a 3 hour session with lots of questions and answers.
 
I could not make the event as was away, so Gas safe re-organised an actual personal inspection with my usual contact.
Although i know it must have cost a bit more, i much much prefer it as the guy actually sees my installs and gives excellent feedback and help where the installs are a little unusual. (Non dom work).
 
Yes I have, basically a power point presentation session with a small assessment at the end, all based around IGEM/G/11 unsafe situations procedures.
About 25 fairly local engineers for a 3 hour session with lots of questions and answers.
thanks for the reply.. how many questions in the assesment? guessing its just basic stuff that no one would fail
 
Have to agree, I think in person inspections are better and should be carried out. There will be a disaster with this new system and HSE will come crashing down on them. Its a cost cutting exercise which will have bad consequences.
 
thanks for the reply.. how many questions in the assesment? guessing its just basic stuff that no one would fail

Can’t remember how many, maybe 40 or 50, it was open book you were asked to take a copy of unsafe situ. Dead easy pal, we’re told if you failed the test you’d get a site visit.
 
Have to agree, I think in person inspections are better and should be carried out. There will be a disaster with this new system and HSE will come crashing down on them. Its a cost cutting exercise which will have bad consequences.

Haha, that’s a bit extreme! One thing they were pushing is for is engineers to report non gsr installations or even bad gsr installations we come across, I’ve seen plenty jobs not quite right when I go to do a service or landlords check, just bits and bobs like gas pipe slightly undersized or flue brackets missing, I’ll generally just speak to the customer/landlord and give them a price to do the remedial works to bring it up to scratch. GasSafe were encouraging engineers to report the job, I suppose it’s a way of doing site visits without wasting time on decent jobs, but I just guessing there.
 
Yes, I did mine same day as townfanjon, but mine was in the morning and town's was pm so we missed each other but basically only a real numpty would fail. Nowt to worry about, open book, tick box, multiple choice exercise.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "gas safe inspection event" which is posted in Gas Engineers Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Member Type
Heating Engineer (Has GSR)

Thread Information

Title
gas safe inspection event
Prefix
N/A
Forum
Gas Engineers Forum
Start date
Last reply date
Replies
13

Thread Tags

Thread statistics

Created
kbs,
Last reply from
Darren Jackson,
Replies
13
Views
3,888

Weekly or Monthly Email Digest

Back
Top