Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Aug 26, 2010
9
0
1
Hi all
I’ve been given a Grohe Rapido E to install in a wet room shower. Apart from the fact that its not thermostatic controlled I can find very little about these valves.
It’s got a single lever and I can see that the hot/cold mix is controlled by rotation - presumably flow (off to full) is controlled by the up/down action?
Sorry for the dumb question but I’ve never seen one of these before - should I give it back to customer and go for a thermostatic version?
All help and advice appreciated - thanks
Andy
 
If the customer bought it thinking it was thermostatic they're going to be disappointed.
Maybe check they know what they've bought.


Does it have this control lever?


Grohe lever.PNG
 
Last edited:
If the customer bought it thinking it was thermostatic they're going to be disappointed.
Maybe check they know what they've bought.


Does it have this control lever?


View attachment 47114
Yes that’s the lever...basic question...does the up/down action control flow or switch between the 2 outlets?...I can’t find the answer anywhere.
I’m thinking of knocking up a test ’rig’ but thought I’d ask on here first.
If customer insists on keeping this valve I’ll probably recommend a
If the customer bought it thinking it was thermostatic they're going to be disappointed.
Maybe check they know what they've bought.


Does it have this control lever?


View attachment 47114
If the customer bought it thinking it was thermostatic they're going to be disappointed.
Maybe check they know what they've bought.


Does it have this control lever?


View attachment 47114
Thanks for the reply...Yes that’s the lever...does the up/down action control flow or switch between upper/lower outlets? I was going to set up a test ’rig’’ but thought I would ask on here first.
If they insist on keeping this valve I’ll probably put a mixer in the feed somewhere.
Regards
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

D
  • Question Question
Replies
13
Views
3K

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.