Hairline crack

[darrenangel]

I have a hairline crack in the corner of my shower tray. Is there a spray on, or paint on liquid silicone on the market. Normal silicone is too thick to penetrate the crack. Thanks in advance. Darren

 

[PlumbBobBob]

have a look here Capt. Tolley's Creeping Crack Cure

 

[Guest123]

have a look here Capt. Tolley's Creeping Crack Cure

Good link mate, but sorry my mind was thinking of other things reading that! LOL

 

[Dotty]

Good link mate, but sorry my mind was thinking of other things reading that! LOL

You're getting worse!

 

[Koogatubac]

Dont bother wasting your money,

MY OWN shower trays have cracked 3 times (3 plastic cheap trays) 1 even 2yrs, they developed a hairline crack which allowed water to pass through

I bought a china enamel tray ( held on a thick wooden base for plenty of support ) its been strong now for the past 4 years

Its like a exhaust of your car, if it gets a crack you can use exhaust putty, it holds for few days then the crack reappears.

Advice and best solution - BUY A NEW TRAY

Good luck mate 🙂

 

[Guest123]

Any shower tray that's not sufficiently supported will crack over time. I always use 18mm plywood under mine plus sand and cement if it's a stone cast tray.

 

[TBServices]

Any shower tray that's not sufficiently supported will crack over time. I always use 18mm plywood under mine plus sand and cement if it's a stone cast tray.

Ditto, although I usually used cement based flexi adhesive

 

[Irish]

Yeah I find 1m wbp and flexible tile adhesive are the best, it's defiantly best to go for a new tray

 

[Irish]

18mm not 1mm