Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

I am hearing of logic div valves and fans failing, from a pal who does a HA contract on these, they spec'd them and are cr@ping it as they are 3 year old! Causing lots of out of hours calls under warranty or not as they have to visit first
 
I am hearing of logic div valves and fans failing, from a pal who does a HA contract on these, they spec'd them and are cr@ping it as they are 3 year old! Causing lots of out of hours calls under warranty or not as they have to visit first

The valves fail loads pass down the heatng side, our place installed a load I've seen far far too many fail and they have only been in six months, seen one boiler go through 3 in six months!
 
  • Like
Reactions: 1 person
On a tangent, how does everybody deal with ongoing nightmare boiler repairs? I try and only go to appliances I'm used to, unless in really slack. I find it a total nightmare when you keep on sticking in bits on the advise of the tech helplines. Answering to the customer and having to wait for more parts, and then there's the huge bill at the end that you struggle to justify. I keep pretty busy and have done for a few years, but worry that not attending some appliances is holding back my knowledge and may have effects on my future business.
 
  • Like
Reactions: 1 person
went out on a call last night changed a roomstat this was an isar water was barely lukewarm but you couldnt touch the plate hex in the boiler it was that hot no heat going down the heating so im assuming its a scaled plate not transfering the heat
 
went out on a call last night changed a roomstat this was an isar water was barely lukewarm but you couldnt touch the plate hex in the boiler it was that hot no heat going down the heating so im assuming its a scaled plate not transfering the heat
Sounds like it Steve assuming correct gas rate, flow rate etc
 
Be rather amusing if it was. New boiler goes in and same thing happens!

cheery little soul arent you, but having proved that one wasnt an issue via another appliance the new intergas went in yesturday and I have a v happy little old lady waiting for a commissioning flush and rm stat swap as the one they left her before was a 7 day multiprogrammable heap that she couldnt even turn on or off manually.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.