Help with an Ideal combi boiler

[Topcat01322]

Hi, I live in Dartford Kent.

I have a ideal combi boiler which is roughly 6/7 years old. When the hot water is on and I run the hot water the pipes to Immersion tank make a loud vibrating burping noise. Any ideas what the issue would be?

 

[Lou]

Anyone got any ideas for top cat?

 

[Sharp Point]

I have one. If you have a cylinder, I doubt you have a combi boiler

😉

 

[Harvest Fields]

Hi, I live in Dartford Kent.

I have a ideal combi boiler which is roughly 6/7 years old. When the hot water is on and I run the hot water the pipes to Immersion tank make a loud vibrating burping noise. Any ideas what the issue would be?

Afternoon. You say you have a combi boiler but also state in your thread that you have an immersion tank? Can we have some pictures of what you have please.

 

[SimonG]

Washer gone in tank inlet valve. Not a combi

 

[Aire]

As above, either replace or service your float valve in the header tank which feeds your cylinder. Water hammer as your describing is a typical symptom of a faulty float valve

 

[Topcat01322]

Sorry all. Not great with what’s what! I post some pictures and videos

 

[Topcat01322]

These are some pics of my cylinder

Washer gone in tank inlet valve. Not a combi

 

[Harvest Fields]

Evening mate. you require the services of a registered G3 engineer. There is nothing you can touch in the cylinder. Sorry.

 

[SimonG]

unvented cylinder, as Harvest has said g3 engineer.