high co/co2 on grill

[martyn]

Hi guys,

Ive just purchased an Anton v2 FGA, (done the cpa1) yet im still unsure...

I have just tested my grill at home and I am getting 300ppm ratio 0.0110 plus from the grill outlet.

It is the old style cooker whit the grill above the 4 rings so I am testing at the very top next to the plate warming rack the cooker is a cannon DL

I have no reason to suspect the grill to be faulty I was just "Playing" am I doing something wrong or is it fkd?😱

 

[markinaark]

Hi guys,

Ive just purchased an Anton v2 FGA, (done the cpa1) yet im still unsure...

I have just tested my grill at home and I am getting 300ppm ratio 0.0110 plus from the grill outlet.

It is the old style cooker whit the grill above the 4 rings so I am testing at the very top next to the plate warming rack the cooker is a cannon DL

I have no reason to suspect the grill to be faulty I was just "Playing" am I doing something wrong or is it fkd?😱

if new still only burning off protective finishes , id guess

 

[martyn]

The FGA is new but the cooker is an old thing provided by the landlord....

 

[GrahamM]

I do not think you are too far off limits for ratio anyway.
An EU approved appliance action levels for grill are 0.010
Non EU approved appliance is 0.020

Is the grill frett intact and are you letting heat up fully? Give it a good 10 mins on full bung.

The normal procedure is to have oven on warmed up and ring burners on with pots water with lids as well as grill and the combined action level ratio is 0.018.

Maybe it's in need of a good scrub, but if it old and worn then replacement may be only answer.