Ideal logic 24 + heats radiators once then stops shows no fault !

[Harvest Fields]

What is the black wire connected to in the background of the first pic?
Has it always done this or only when the new stat was fitted?

 

[Leezo]

What is the black wire connected to in the background of the first pic?
Has it always done this or only when the new stat was fitted?

Not sure, i was not there when it was fitted. Looks like a 'choc' type connector will have a further look tomorrow..

 

[Leezo]

Sounds like the boiler works fine, what stat/ controls do you have? Make and model

Is the room stat in the cold room? Away from a heat sorce?

Timer is Drayton LP711 and stat is RTS8
Have posted some pics of that helps

 

[AWheating]

Does the radiator in the room the stats in get hot first when heatings on? It may need to be balanced down to keep that space cooler. Sounds like the other rooms cool down fast but the room with the stat stays warm for a lot longer

 

[Leezo]

Does the radiator in the room the stats in get hot first when heatings on? It may need to be balanced down to keep that space cooler. Sounds like the other rooms cool down fast but the room with the stat stays warm for a lot longer

Hi Thanks for the reply. The system has been balanced. Even switched the nearest rad to the stat off to see if it was the same. Same thing happened. From what has been said so far it seems to be a problem with the stat or timer not letting the boiler flash up once the rads/ rooms have cooled. But since they have been changed i can only assume it's something in the wiring set up....?

 

[Gasmk1]

change it out for a wireless rf stat

 

[Gasinspect]

Quickest way to fault find, disconnect state wiring at boiler and link across. Then know if it is stated wiring or boiler.

 

[Gasinspect]

Sorry, spellchecker, stat, not state!

 

[Leezo]

Quickest way to fault find, disconnect state wiring at boiler and link across. Then know if it is stated wiring or boiler.

Many thanks, going for the wireless stat option : )

 

[Harvest Fields]

Many thanks, going for the wireless stat option : )[/QUOTE
Nice to hear. But if you are not gas safe registered you should not take the casing off the boiler. Hopefully you did not do this.