if you install and repair things

[Billy Bob Bob]

make it easy for yourself if it fails,built in easy maintenance,all our jobs are like this

 

[MOSSEP]

I dont' think you zone valves are going to work, the wires need connecting!:tounge_smile:

 

[villa_tom]

I thought you used that centramag filter??

 

[Billy Bob Bob]

I thought you used that centramag filter??

free one off adey we bought there flusher thingy

 

[Rickster123]

Gas man pm me your address I'll send you some 22mm end feed elbows! :devilish:

 

[villa_tom]

Gas man pm me your address I'll send you some 22mm end feed elbows! :devilish:

Dont lie 🙂 you use plastic 🙂

 

[Rickster123]

Dont lie 🙂 you use plastic 🙂

Its housing association work, can't afford plastic!

 

[Irish]

Gas man pm me your address I'll send you some 22mm end feed elbows! :devilish:

was gonna say something similar but then realised he wanted to make it easy to dismantle

 

[Billy Bob Bob]

Gas man pm me your address I'll send you some 22mm end feed elbows! :devilish:

see if you can work out why the comp bends there cunny funt:30:

 

[Billy Bob Bob]

was gonna say something similar but then realised he wanted to make it easy to dismantle

ignore adam,he,s always like this

 

[Rickster123]

see if you can work out why the comp bends there cunny funt:30:

Coz it was peeing down outside and it's all you had in your fittings tray?

 

[stevetheplumber]

why do you need the valve on the inlet ?isnt the pump valve or boiler iso just above?

 

[diamondgas]

make it easy for yourself if it fails,built in easy maintenance,all our jobs are like this

You sold the client a good idea mark ... Not many would go for the additional cost of all the fittings .. I'd probably advise on boxing it all in with a removable panel though!... lots of things on show that a custard can mess with there, you know what they're like... 🙂

 

[plumber0808]

It would cost too much if I done that on every job. Just bill them appropriately if anything needs doing changing.

 

[Billy Bob Bob]

why do you need the valve on the inlet ?isnt the pump valve or boiler iso just above?

dont ever touch boiler isos,they always leak,its a combi above it

 

[Billy Bob Bob]

You sold the client a good idea mark ... Not many would go for the additional cost of all the fittings .. I'd probably advise on boxing it all in with a removable panel though!... lots of things on show that a custard can mess with there, you know what they're like... 🙂

its all going in a top to bottom unit with removable false back,otherwise they will turn them off trying to put water in LOL

 

[AWheating]

this is what we used to do on many a council job in certain areas. Normally would be gate/ lockshield valves.

 

[IDCHAPPY]

dont ever touch boiler isos,they always leak,its a combi above it

This for sure, i try not to even look at the valves.. if i do i apologize immediately :lol: