Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Apr 10, 2022
4
0
1
Gloucester
Member Type
DIY or Homeowner
Hi,

I am getting hot water in the kitchen when I turn the kitchen tap on. However the hot water in the upstairs bathroom for both bath and sink is only coming luke warm. I have an old Worcester combi boiler and the boiler ignites when I turn either of the upstairs hot taps on.

The bath hot water warms up to the required temp when the sink cold water is on and vice versa, does this indicate water crossover. I had a mixer tap installed in the bath a few months ago and the hot water was working fine until recently.

Also is there any reason why the kitchen sink water takes a while to heat up, I.e. I have to blast it to ignite the boiler and then it takes around 30 seconds for hot water.

Thanks in advance
 
It could be the mixer tap that’s causing the issue. If it’s working when opening the cold, then it’s just that the hot water flow is reduced and it can heat the water better. It could be a few things, but you could start with the mixer.
 
  • Like
Reactions: AB123456

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.