Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

TerryWaite

Plumbers Arms member
Plumber
Gas Engineer
Sep 20, 2011
324
70
28
Wales
Hi

I am having a problem with a Mira 415 mixer shower, it will turn on and gets hot (well fairly) but will not turn off at all.

I have worked on one of these before and had a problem that it wasnt mixing properly, I stripped it down, re-assembled it, and got it mixing properly and turning off.

The one I had working ok turned off when the dial was in the middle position, if you turned it one way, the shower came on hot, the other way, cold, and right in the middle was off.

However, this other one I have had in bits and tried every concievable configuration, but I just cant get it to turn off. Has anyone had this problem with this or any other similar mixer shower??

Your help would be much appreciated. I have posted a pic of the shower below.

Thanks. Mira_415_0105.jpg
 
Have a similar problem at home, the cold shuts off ok but passes on the hot side, cartridge was quite dear so popped a ball valve between the outlet and shower hose. Which will do until I get around to replacing the bathroom
 
Before forking out for a new cartridge check out the cartridge housing.
The back of the cartridge slots into a water inlet at the back of the casing and the o-ring inside that inlet may have dislodged. They're a pain in the rear to get back in though. Good light,a crochering needle and lots of patience needed if it is that.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.