My first cylinder install with boiler

[jaydebruyne]

just wanted to share some pics of my first cylinder/boiler install.. I’m quite proud of myself. Place had electric heaters before. So brand new system, 3 level flat, 2 bathrooms, new gas run & meter, 21kw Baxi EcoBlue heat only, 250ltr unvented cylinder, 10 rad, s-plan system. Excuse the stray wires around the electronics, I’m going back tomorrow to tidy them up with some mini trunking.

 

[ShaunCorbs]

jay few problems

one major and one minor can you guess what?

but over all very good

 

[jaydebruyne]

jay few problems

one major and one minor can you guess what?

but over all very good

The PRV discharge (temporary until they do extension at side of house).. ?

 

[ShaunCorbs]

The PRV discharge (temporary until they do extension at side of house).. ?

yes spot on

even if its temp still needs to be 300mm before the first bend on either tundish

and the minor you will laugh at this one

 

[jaydebruyne]

yes spot on

even if its temp still needs to be 300mm before the first bend on either tundish

and the minor you will laugh at this one

Lol go on.. what’s the minor??

 

[ShaunCorbs]

Lol go on.. what’s the minor??

the pressure gauge its upside down 😀

 

[jaydebruyne]

the pressure gauge its upside down 😀

Haha I know, annoying right!!! I’ll sort the discharge tomorrow.. gotta Flick the system anyway and tidy the cables.. I thought it was just a max of 600mm from the t&p Relief.. thanks for pointing that out shaun 🙂

 

[jaydebruyne]

I meant flush, not flick!! Haha

 

[mfgs]

Looks good. Discharge isn't correct as Shaun said. But overall a tidy install.

 

[jaydebruyne]

Looks good. Discharge isn't correct as Shaun said. But overall a tidy install.

Cheers mfgs, yeah gonna sort it tomorrow 🙂

 

[Harvest Fields]

Very tidy mate. How long did that all take? Just one question, is there much space above the vessels?

 

[ShaunCorbs]

Very tidy mate. How long did that all take? Just one question, is there much space above the vessels?

for what?

 

[Harvest Fields]

Recharging?

 

[ShaunCorbs]

Recharging?

I always pull them off to recharge

 

[Harvest Fields]

Leave valves open once empty and charge in situ me.

 

[jaydebruyne]

Very tidy mate. How long did that all take? Just one question, is there much space above the vessels?

Enough space to be able to remove them if they need replacing or stick a pump in if need recharging.. ah mate, time is my nemesis, all in it probably took me about 10/11 days. I’m not the quickest guy in the world!!

 

[jaydebruyne]

I always pull them off to recharge

I don’t bother.. I just drain the pressure and recharge where they are

 

[ShaunCorbs]

Enough space to be able to remove them if they need replacing or stick a pump in if need recharging.. ah mate, time is my nemesis, all in it probably took me about 10/11 days. I’m not the quickest guy in the world!!

Faster than me 😀

 

[jaydebruyne]

Faster than me 😀

I doubt that mate.. I’m the slowest there is!!! Haha

 

[ShaunCorbs]

I doubt that mate.. I’m the slowest there is!!! Haha

😀

Well I have to ask how did you get on with the wiring remember when you started you wouldn't of touched it ?

 

[jaydebruyne]

😀

Well I have to ask how did you get on with the wiring remember when you started you wouldn't of touched it ?

Lol you know what.. I was really excited to do it as it was my first fresh system and the wiring was no issue.. wired it up, switched it on and everything worked!! Happy days! Had to check the cylinder stat wiring as I’ve never done that before but yeah.. probably the easiest part of the whole job.. who’d have thought eh 😉

 

[Harvest Fields]

Lol you know what.. I was really excited to do it as it was my first fresh system and the wiring was no issue.. wired it up, switched it on and everything worked!! Happy days! Had to check the cylinder stat wiring as I’ve never done that before but yeah.. probably the easiest part of the whole job.. who’d have thought eh 😉

I love wiring a fresh centre where nobody else has ever been. Like a fresh virgins honey pot.😀😉

 

[Harvest Fields]

Enough space to be able to remove them if they need replacing or stick a pump in if need recharging.. ah mate, time is my nemesis, all in it probably took me about 10/11 days. I’m not the quickest guy in the world!!

Nothing wrong with that mate and it looks awesome. One for the portfolio.

 

[jaydebruyne]

I love wiring a fresh centre where nobody else has ever been. Like a fresh virgins honey pot.😀😉

Haha and no one will ever replace the first wiring 😛

 

[Harvest Fields]

Haha and no one will ever replace the first wiring 😛

Nope. Never happens.

 

[jaydebruyne]

Discharge fixed!!

 

[ShaunCorbs]

Spot on jay

Think you've cursed me 😀

Since yesterday I've had two unvented cylinder jobs come out

 

[Harvest Fields]

Spot on jay

Think you've cursed me 😀

Since yesterday I've had two unvented cylinder jobs come out

View attachment 32998

View attachment 32999

I literally called my mate last night about this. Have not touched an unvented in ages. And now I have been to 4 in the last week. All Miles apart from each other. Whilst I have you all, went to this yesterday. There is a whole world of issues but not sure about this one? Vaillant unvented 260L cylinder on an EcoTec plus 837 combi and the expansion tank is piped straight into the inlet control valve. If I remember correctly this shouldn’t be like that, but a second opinion would be good.

 

[jaydebruyne]

I literally called my mate last night about this. Have not touched an unvented in ages. And now I have been to 4 in the last week. All Miles apart from each other. Whilst I have you all, went to this yesterday. There is a whole world of issues but not sure about this one? Vaillant unvented 260L cylinder on an EcoTec plus 837 combi and the expansion tank is piped straight into the inlet control valve. If I remember correctly this shouldn’t be like that, but a second opinion would be good.

View attachment 33000

Expansion has to be between the inlet valve and cylinder..

 

[Harvest Fields]

That’s what my understand is but I’m sure i have seen somewhere that on the Vaillant’s they set up differently. But waiting for Vaillant to email instructions out.

 

[ShaunCorbs]

It can be piped into the control block / manifold but it needs to be in the right port eg the expansion one and not the balanced cold

 

[jaydebruyne]

Spot on jay

Think you've cursed me 😀

Since yesterday I've had two unvented cylinder jobs come out

View attachment 32998

View attachment 32999

Lol glad it’s not just me then 😀

 

[Harvest Fields]

It can be piped into the control block / manifold but it needs to be in the right port eg the expansion one and not the balanced cold

Glad I have asked for the instructions now.

 

[ShaunCorbs]

Glad I have asked for the instructions now.

Do you want them now ?

 

[Harvest Fields]

Do you want them now ?

Can you put a link on? They are not on the Vaillant app.