Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

My first cylinder install with boiler

View the thread, titled "My first cylinder install with boiler" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Remember when Jay used to sweat about simple things. My my look at him now!
🙂 The world is your oyster m8.
Haha I know mate.. how funny!! Who’d have thought the guy who’d pooh his pants over nothing is now doing stuff like this! I wouldn’t be here without you guys, you’re my lifeline!!!!
 
Ex vessels were always piped out of the inlet control set , but as the years have gone by , tee-ing into cold feed is the done thing
 
Not bad for your first one bud few errors but overall a tidy job your gonna struggle lagging your pipework ,next time space your pipes off the wall a bit and a little further apart . cheers kop
 
Not bad for your first one bud few errors but overall a tidy job your gonna struggle lagging your pipework ,next time space your pipes off the wall a bit and a little further apart . cheers kop
What errors can you see kop? Other than the discharge which I sorted today.
 
Out of curiosity, roughly what would you guys charge (labour only) to fit a system like this.. all new heating and cold/hot water pipework throughout, 10 rads, boiler/cylinder and all controls and new gas run, about 16 meters.
 
Just under 150 a day for London jay is too cheap

Would say min £300 for a day in London area but I can't say as I don't do anything / price for anything there
 
Day rate is £250 for plumbing, £350 for gas.. I’ll just have to put this one down to experience and move on!! If I can...😱

Anything like you've just done with both bits (plumbing and gas ) half / middle your charges

So your day rate for a job like you've just done £300 etc
 
Anything like you've just done with both bits (plumbing and gas ) half / middle your charges

So your day rate for a job like you've just done £300 etc
I think I’ll just have to say it took longer than expected and charge £300 a day, don’t want to completely lose out here!!
 
Did you quote for wiring it up ?
Lol no.. I just thought that’s a part of it all. I just looked at my original quote and I said I based my quote on 6 days work which may extend and materials may also increase so that’s good!! Thank %#^* I said that!! Phew how I thought I’d get that done in 6 days is beyond me!!!
 
Would add a bit on that to even it out etc

Could loose £600 on electrics

And pays to have a good set of t and c

Also your lab would of been right if it was 6 days just over 300 a day
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "My first cylinder install with boiler" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread statistics

Created
jaydebruyne,
Last reply from
mikeygas,
Replies
158
Views
4,708
Back
Top