New install on an old system.

[Nostrum]

Sorry Danny didn't word the post very well, maybe I mis understood your previous post as well. I thought you had said the llh had high limit and low stat hence the question. Is the high limit just a belt and brace approach to overheat then rather than relying on the boiler stat?

 

[vern]

Cheers Vern, and thanks for the advice. You see I fitted the prv in the header as suggested!

Yes pal, good work there, next time you won't think twice about this sort of set up, my advice is keep all materials invoices copied in one place, then when you get a similar job, you have a guide materials and price list, saves loads of time

 

[Dannypipe]

Yes pal, good work there, next time you won't think twice about this sort of set up, my advice is keep all materials invoices copied in one place, then when you get a similar job, you have a guide materials and price list, saves loads of time

Cheers Vern. More good advice mate.

 

[Gray0689]

View attachment 16508View attachment 16509View attachment 16510View attachment 16511View attachment 16512View attachment 16513

Lovely work as usual Danny

 

[Dannypipe]

Cheers Gray.

 

[Killy Bing]

Shoddy cow boy work 😉

where did you get the llh made in the end?

 

[Dannypipe]

Sorry Danny didn't word the post very well, maybe I mis understood your previous post as well. I thought you had said the llh had high limit and low stat hence the question. Is the high limit just a belt and brace approach to overheat then rather than relying on the boiler stat?

(Not going out tonight and can't drink as the wife is now dead on the due date of our next baby!)

Its total belt and braces as the boiler has an over heat stat of course, and a frost stat.

But yes frost stat linked with a low limit stat and the the header with a high limit.

Worcester Bosch show it as that in their literature, so I just followed their advice.

Billy the header came from VA Heating.

 

[Killy Bing]

It does look good danny 🙂

now i think you're going to start hunting for......problem jobs others run from !!


Good luck with the baby 🙂

 

[Dannypipe]

LOL! Yeah, right!

Cheers mate. I'll let you know when she arrives!