Newbie. How can I fit this basin waste to the trap. The trap is only slightly lower than the sink

[Monti Ali]

The Waste is slightly higher than the trap, I've been advised to use the flexi fitting but it leaks and doesn't look strong enough especially as water remains in the pipe. I would call a plumber, but I know its a simple solution.. for someone! I'm a total newbie so advice would be great!

Also the trap is not steady it moves. is there a way to connect it to the wall?

 

[ShaunCorbs]

Wtf is that mess needs ripping out and starting again from the chrome waste pipe sticking out of the floor

 

[Monti Ali]

Wtf is that mess needs ripping out and starting again from the chrome waste pipe stickin

 

[Monti Ali]

Thanks, I agree the connection should be taken out, but the chrome waste pipe and trap connection is fine. Constructive feedback about the connection please?

 

[ShaunCorbs]

You can’t have a double trap also your existing trap has an extendable riser if not you should be able to buy an extension

 

[Basher]

slacken the knurled ring at the top of the bottle (hidden behing the white flexi tube in your photo) and see if you can pull up the riser enough to fit it to the waste. If not, as Shaun says, you can replace the riser with something like this:

BES.co.uk | Next Day Delivery On 15,000 + Plumbing Supplies

Order bottle trap extension tubes and other waste water accessories online at BES.co.uk. Low Prices, Free Next Day Delivery Available, 15k Plus Products in stock. P/N: 16198

www.bes.co.uk