Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

S

sparkyrose

Hi all,

I am very much in the DIY category here. I have a toilet in the house where the cistern was running abit so we had a guy come out and fit a new syphon. He put in a fairly standard one but when it now flushes, instead of a good movement of water the bowl gradually fills up and then gradually empties. The guy said he thought the type of toilet meant that there was a special type of syphon that would essentially go down the back part of the bowl and "pull" the water out using suction of some kind. Hopefully that makes sense.

Anyway, the guy said he would get a replacement part but has been useless and impossible to get back, so I have decided to do it myself. I'm handy enough but I don't know the name of the type of part I need. This is where I am turning to you guys!

The guy who was here said it was kind of rare/old style of toilet. If I know what I am looking for I think I can find the part I need and fit it. Does anyone have an idea? I have attached a couple of pics of the toilet in case they are helpful.

Any assistance greatly appreciated!
 

Attachments

  • IMG_2284.jpg
    IMG_2284.jpg
    95.4 KB · Views: 66
  • IMG_2285.jpg
    IMG_2285.jpg
    94.2 KB · Views: 60
Thanks to all for the helpful replies. I will investigate and if I have trouble fitting it (entirely possible) I may be back for further advice!

Best

Mark
 
They are famous for being tricky but there are good few guys on here who seem to have got the knack.
 
That's an Armitage toilet I think and therefore straight forward enough.
You can actually buy an Armitage Airex (bomb) and if you do, then use an Armitage syphon as they fit each other.
The Airex will have a plastic inner stem where a domed rubber washer (normally about 40mm wide) fits on to stem. Make sure you fit the FLAT part of the washer going downwards and just push in on to stem a few mm and gently lower the cistern down and the washer will push to its correct place.
Best toilet made, that particular one!
 
Last edited:
did one last year in nice block of apartments. So silent, original wc in the
1960's built flat, chosen in consideration of neighbours below, sharp
contrast to todays laminate flooring/ telly/ shouting at 3am.
 
Last edited:

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.