Pedalstall Basin on plasterboard walls

[redbidders]

Hi,

Had to fit an Express pedalstall basin on a very week pasterboard wall today.
There was not where to fix any noggins so I used two platerboard fixings and a gripping adhesive similar to no more nails.
Will this be strong enough to hold the basin? Bearing in mind its also supported by the pedalstall.

Thanks,

Jason

 

[Alanka]

It probably will be strong enough, but if you haven't already done so, you should seal the basin to the wall all the way round (including underneath!) with silicone caulk, well-pushed in. This adds enormously to the adhesion to the wall.