Need to plumb in a new washing machine. The room has a sink and toilet one one side, and at the other end of the room, enough space for washing machine and dryer to sit next to eachother. The main waste stack is right next to where the machine will sit
So, I need about 5m of copper pipe routed from under the sink, up to the ceiling, and over to the other side of the room. And, a hole cut into drywall and waste water pipe plumbed into the main stack
Solder joints and elbows for the bits of copper that are on show
The rest (behind the machine) will be covered by some cupboards which are yet to be built, so can be less than perfect
Thanks for reading and hope to hear from a local tradesman!
Best wishes,
George
So, I need about 5m of copper pipe routed from under the sink, up to the ceiling, and over to the other side of the room. And, a hole cut into drywall and waste water pipe plumbed into the main stack
Solder joints and elbows for the bits of copper that are on show
The rest (behind the machine) will be covered by some cupboards which are yet to be built, so can be less than perfect
Thanks for reading and hope to hear from a local tradesman!
Best wishes,
George
