Press tool.....which one?

[helpsy]

Hi all. I am looking at getting a press tool and was looking for advice please TIA.

 

[Scott_D]

If you have a Williams account you can try before you buy and the hire cost is deducted from the tool

 

[helpsy]

If you have a Williams account you can try before you buy and the hire cost is deducted from the tool

Yes I have a Williams account and was looking at buying the Rems.

 

[exedon2]

We have 2 Rems press tools 110v and a 22v mini press. good tools if you register them online 5 year warranty.

 

[Scott_D]

I have a really old rems
I would probably by the nova press next time

 

[ShaunCorbs]

Novopress for me also domestic aco103 eg upto 35mm

 

[Harvest Fields]

Novopress for me also domestic aco103 eg upto 35mm

what jaws you got?

 

[ShaunCorbs]

what jaws you got?

M and u profile (copper and mlcp)

 

[helpsy]

Ordered the REMS machine.....I normally solder everything......but this week in the attic was insane 110 plus degrees......I lasted an hour......don't know how much sweat I lost.....started feeling dizzy.....or is that dozy lol

 

[Scott_D]

Ordered the REMS machine..I normally solder everything...but this week in the attic was insane 110 plus degrees...I lasted an hour...don't know how much sweat I lost..started feeling dizzy..or is that dozy lol

Have you done any press work before?

 

[Harvest Fields]

I haven’t. Still weighing it up.

 

[Riley]

Novo 103 for me too

 

[helpsy]

Have you done any press work before?

I have done a little bit on someone else's job.

 

[Riley]

I haven’t. Still weighing it up.

Try it you might like it

 

[WC1]

I have a really old rems
I would probably by the nova press next time

Can you tell us why?

 

[Scott_D]

Can you tell us why?

My Rems is very heavy (the newer one may be lighter)
I prefer the shape of the novapress, I think you can get it into smaller spaces.
I believe the Novapress use milwaukee batterys which are easy to obtain

 

[ShaunCorbs]

Also quieter / not a sharp of a noise

 

[Harvest Fields]

Try it you might like it

Itsss misunderstood !

 

[Riley]

Press fit? Or what you’ve tried to press fit? Only ask as I was doing a job with a handy man and he asked if he could try and crimp a joint to see how it was. I said and he went crawling off into the loft space. Came back to find him and his mate giggling like girls as they were trying to crimp each other. Idiots

 

[WC1]

This post has been edited

 

[ShaunCorbs]

NovoPress ACO 103 Press Tool Kit, Novapress, Press Fit, Crimping

pressquick.co.uk

They should have stock phone or email before hand just to check

 

[WC1]

NovoPress ACO 103 Press Tool Kit, Novapress, Press Fit, Crimping

pressquick.co.uk

They should have stock phone or email before hand just to check

Thanks Shaun just after writing I found a couple of places claiming to have stock but will check before ordering.