PVC pipe laptop stand

Jamifandom · May 10, 2020

I would like to make a DIY laptop stand from PVC pipes from a how-to I found online (Laptop Stand From PVC Pipes - http://pvc-projects.blogspot.com/2013/06/laptop-stand-from-pvc-pipes.html) but can immediately see the problem with the system as it would come unstuck, as I would be looking to disassemble it when not it use to it fits into a small area and so am not going to glue it together.

I was looking online for threaded elbow joints but then realised that the PVC piping itself is not threaded, is there a method that I could use to thread the exterior of the pipes and the inside to match my needs, if that would be the best option?

DripsnDropsBognor · May 10, 2020

I would make it up and glue all the leg parts together and not the long straight bit so that it could be popped and transported. We don't have a lot of threaded waste pipes over here and if you can get them they won't be cheap

Jamifandom · May 10, 2020

I found this tool : JIAY NPT Die Threading Tool Kit PVC Die Pipe Assembly for Pumps: Amazon.co.uk: DIY & Tools - https://www.amazon.co.uk/JIAY-Threading-Tool-Assembly-Pumps/dp/B07SQ6KDF1/ref=sr_1_3?dchild=1&keywords=PVC+pipe+threading+tool&qid=1589143721&sr=8-3

I could make my own

moonlight · May 11, 2020

Our waste fittings are quite snug and if you are only using it for your laptop stand they would be fine. I looked at your link they would do the job and would not need to be glued.

rpm · May 11, 2020

Could you drill a hole and use a self tapping screws in a few places. The pipes would be a snug fit to start but depending on how many times it was assembled and dismantled they will become loose in time.
Compression fittings & metal pipe perhaps?

DripsnDropsBognor · May 11, 2020

That is providing

rpm said:
Could you drill a hole and use a self tapping screws in a few places. The pipes would be a snug fit to start but depending on how many times it was assembled and dismantled they will become loose in time.
Compression fittings & metal pipe perhaps?

Didn't think of that not like it's going to leak.
Was thinking if jamifandom is going to be buying from b&q or Wickes. Need to make sure the you buy the right pipe for the fittings as they sell two different types.