Sentinel x100 - Cheapest Supplier.

[Leonardo]

Hi all,

Normal domestic combi-boiler system.

Where is the cheapest place to get Sentinel x100 from?

How often should it be replaced/renewed?

Also looking for the cheapest place to get the test kits.

Needed for a three bedroom home with 13 radiators.

Thanks to any willing to help.

If it helps I live in Ashford near heathrow airport.

 

[Harvest Fields]

I only use on trade suppliers. But screwfix are normally a fair price from what I have heard. Every few years or when the system is drained. 13 rads will need more then 1 bottle if they are decent sized rads.

 

[ShaunCorbs]

+1 to the above and I always put two bottles in
Can't over inhb within reason

 

[Leonardo]

Are you both talking about the 1ltr bottles?

 

[ShaunCorbs]

Are you both talking about the 1ltr bottles?

Yes so you would put 2 l in don't put 2 of the 20l tubs in 😀

 

[bacon_sandwich]

Normally screwfix, the price does move a bit but when its good i get 10 at a time, i go through x100 like water,,,, ha ha

 

[Ric2013]

Tradepoint (B&Q) but price only decent if you're a trade customer.

I wouldn't change it unless draining down for some other reason.

The only test I ever do is take a sample home and stick a nail in it - the test kits strike me as a rip off.

 

[Harvest Fields]

Normally screwfix, the price does move a bit but when its good i get 10 at a time, i go through x100 like water,,,, ha ha

Just don't drink it 😛😛

 

[king of pipes]

Screwfix is always a bit cheaper 2 bottles in the system change every 5years. cheers kop

 

[AWheating]

Fernox f1 is a better product, you need 2 bottles of whatever one you use unless you get Adey mc1+ and then you may get away with one bottle just.

 

[Harvest Fields]

Fernox f1 is a better product, you need 2 bottles of whatever one you use unless you get Adey mc1+ and then you may get away with one bottle just.

With you on the MC1

 

[king of pipes]

Top three in my opion sentinal , adey , fernox not alot to choose between them thats why they are recommended by most boiler manufacturers read your boiler installation manual and one of these products will be advised for use in the system.

 

[Ric2013]

What about MB3? An old guy I know seems to think it is a far better product. Based, I think, on the fact that it costs more. I thought the only reason Fernox still makes MB3 is that it is backwards compatible with MB3?
Who's right?