Shower feed and connections

[buster94]

Hi all. Without going into long-winded explanations what I would like to know is- can I connect the hot supply from a standard vented cylinder
together with the cold mains supply into a shower mixer. I know that I can only control the volume and not the pressure by fitting a valve in the line I.am wondering if the higher pressure of the cold can be compensated within the showers mixing control. Thanks

 

[John.g]

Posts #9 & #10 should answer your query but the hot mixed flowrate will be quite poor as its dependent on the very low pressure from the gravity supplied HW cylinder.

Pressure reducing valve - can I remove? - UK Plumbers Forums | Plumbing Advice; Plumbers Talk Forum

As part of full house renovation, I've switched from a conventional boiler/gravity fed tank to a combi boiler. Under the old system I note that a pressure reducing valve has been fitted to the pipework feeding the shower mixer (assuming as mains cold overpowering the supply pressure from...

www.plumbersforums.net