Shower waste above low point of shower tray

[John Woodland]

Not all the water is draining after showering because the top of the waste is above the tray (See attached pic)


its a 90mm trap and the top is 110mm diameter. if the top was around 100mm it would fit below the lowest part of the tray. Any advice appart from lathing down the top of the waste?

 

[Chester]

If you can't physically change the trap to something better suited then your options are a little limited unfortunately🙁

 

[rpm]

Looks about right, water level being above the outlet.

 

[John Woodland]

Looks about right, water level being above the outlet.

I don’t mean the water in the trap, I mean the water in the shower tray. There is always 1mm+ of water left after use

 

[ShaunCorbs]

TBH that's about normal

Was it a cheap tray ?

 

[Best]

Unfortunately that is typical of how most of the shower traps and trays meet nowadays.
If you can access the trap and waste pipe underneath the tray, then source a trap that fits better.
Also consider the metal type shower waste, as it might be a different size.