good evening,
i'm moving my sink to a different wall. i've bought 15mm speedfit layflat for my basin taps, it's quite expensive and i'm not going to use the majority of it. the more i research, the more confidence i get that i may be able to take out the electric shower and put in a mixer tap.
am i better off returning the 15mm and going for 22mm speedfit to connect the basin and shower supply's together or would 15 do both? i can't think of a situation where someone's going to be using sink and shower at the same time.
the cold tap is off mains and the hots off a new combi boiler that i oversized in case i was ever able to put in a mixer.
the mixer valve has 1/2 inch fittings and speedyfit only do 15mm with 1/2 inch and 22mm with 3/4 inch. so if i went for 22mm ild have to reduce down to fit into the valves anyway.
thank you for reading
i'm moving my sink to a different wall. i've bought 15mm speedfit layflat for my basin taps, it's quite expensive and i'm not going to use the majority of it. the more i research, the more confidence i get that i may be able to take out the electric shower and put in a mixer tap.
am i better off returning the 15mm and going for 22mm speedfit to connect the basin and shower supply's together or would 15 do both? i can't think of a situation where someone's going to be using sink and shower at the same time.
the cold tap is off mains and the hots off a new combi boiler that i oversized in case i was ever able to put in a mixer.
the mixer valve has 1/2 inch fittings and speedyfit only do 15mm with 1/2 inch and 22mm with 3/4 inch. so if i went for 22mm ild have to reduce down to fit into the valves anyway.
thank you for reading
