Suggest gas combi boiler

[Riley]

Good advice Tom, I am smelling a wind up

 

[Leo21]

Op, why? Just why? You've batted every single suggestion off, your not taking any of our advise. Are you just on here flexing your hugely annoying intellect?
I reckon you'll struggle to get an installer on board, anyone with any sense will run a mile.

 

[ShaunCorbs]

i may have missed this somewhere but where are you located op?

 

[rpm]

Awesome not really sure what you need from us

I could say and it`s almost worth a short ban to say it !!!!

 

[gasmanrob]

logic and vogue are two separate boilers measured as one.

 

[Dotty]

I could say and it`s almost worth a short ban to say it !!!!

You'd be safe in the Arms. There's one thread in particular.

 

[Masood]

Op, why? Just why? You've batted every single suggestion off, your not taking any of our advise. Are you just on here flexing your hugely annoying intellect?
I reckon you'll struggle to get an installer on board, anyone with any sense will run a mile.

I quite fancy the challenge actually.... 😛

 

[rpm]

I quite fancy the challenge actually.... 😛

I`ll bring the video camera.

 

[Leo21]

I quite fancy the challenge actually.... 😛

You some kind of pervert? Or a glutton for punishment. You'd spend more time placating the plank than working.

 

[Rickster123]

Is this still rumbling on? Has anyone mentioned biomass yet?

 

[Dotty]

Are you kidding? You heard the ID and FD fans going full throttle?

And it'd never fit in a kitchen cupboard. Hot press maybe......

 

[Rickster123]

Are you kidding? You heard the ID and FD fans going full throttle?

And it'd never fit in a kitchen cupboard. Hot press maybe......

Oh I'll agree it's totally unsuitable but I think they smell lovely when they're running.

 

[Dotty]

Yeah, there is that.

Could compensate the 33db twin fan output.

 

[Masood]

You some kind of pervert? Or a glutton for punishment. You'd spend more time placating the plank than working.

I'd do it on a day rate, let him make every decision and do it exactly to his spec and instructions...

 

[Riley]

Where will you conjure up this magical boiler he desires

 

[Masood]

Where will you conjure up this magical boiler he desires

Oh, he'd have to source it! I could sell him some dihydrogen monoxide though. A bargain at £37.85/litre.

 

[Riley]

Oh, he'd have to source it! I could sell him some dihydrogen monoxide though. A bargain at £37.85/litre.

Sounds a good deal Mas

 

[Ermintrude]

Get a V200 combo. Ufh will be excellent if you use the seperation kit and blending valve. Ufh is not like rads. It requires hydraulic separation and the return from floor to be blended with flow from boiler. The max floor water temp should be 43c

Your water flow rates has little to do with boiler and a lot to do with supply.

Fit a 5000l tank a BCWS at 6 bar and have a balanced cold at 3 bar. Will work perfectly but cost you £££££ V100 is a bit of a budget boiler . Get the 200 with weather comp.

 

[Ermintrude]

Very interesting publication on aluminum vs stainless steel in boilers:
[DLMURL]http://www.weil-mclain.com/en/assets/pdf/WhitePaper_CompALSS_Final.pdf[/DLMURL]

But plumbers on forums are saying to steer clear from aluminum.

The problem with aluminium is pH. You cannot sustain the passive coating on aluminium and steel very easily as there is a window of about 0.7 where both will co exist happily.

But that's chemistry.

 

[Ermintrude]

And errrr the 100 has a plastic hydrolock made by grundfos

 

[Dotty]

I think we'll leave it there.

 

[Dan]

Don't mind me while I reply to a few of the threads. We need the new thread pages to be picked up correctly. If this thread isn't current, just visit the plumbing forum and post your own new thread or checkout the other existing threads.