Thermostatic mixer valve

[Jaykay22]

I will be taking out my bath and putting a shower tray in. Under the bath there is a thermostatic mixer valve, I can't see ATM but pretty sure it's going to the bath taps, it is about 6 to 8 inches out of the floor boards so will be in the way, is it ok to cut it to floor board level'ish and cap it off.

 

[fowlerboi]

Yes it is a requirement for baths but if you’re removing it then it can go too

 

[Jaykay22]

Yes it is a requirement for baths but if you’re removing it then it can go too

Yes it is a requirement for baths but if you’re removing it then it can go too

Thank you very much