Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Nov 20, 2012
6,128
2,736
113
BRISTOL
Anyone else had complaints of poor hot flow on Vaillant combis?
They are restricted to the lpm that allows the boiler to give a 42 degree rise
24kw 8lpm
30kw 10lpm
It means the water is hot but the flow “isn’t as good as the old boiler”
 
Anyone else had complaints of poor hot flow on Vaillant combis?
They are restricted to the lpm that allows the boiler to give a 42 degree rise
24kw 8lpm
30kw 10lpm
It means the water is hot but the flow “isn’t as good as the old boiler”
This is why you end up fitting an 835 in place of an 30 kw old boiler in a 3 bed. As the old boiler probably did 13lpm and a 30 kw Vaillant will not do that. So you have to fit the 835 and range rate the heating.
 
This is why you end up fitting an 835 in place of an 30 kw old boiler in a 3 bed. As the old boiler probably did 13lpm and a 30 kw Vaillant will not do that. So you have to fit the 835 and range rate the heating.
It means the boiler costs more and needs a gas upgrade
It’s a shame you can’t remove the restrictor and fit one that allows a 35 degree rise
 
It means the boiler costs more and needs a gas upgrade
It’s a shame you can’t remove the restrictor and fit one that allows a 35 degree rise
That’s why it is important to check flow rates when upgrading boilers and not just banging in a direct replacement. Vaillant have a 15mm connection on the gas. I have only ever had to upgrade about 5 gas pipes in my time.
 
  • Informative
Reactions: 1 person
Most boilers have restrictions stops too much flow going through the plate and giving warm water

Baxi in the tails
Worcester in the plate/ pipes to the plate
Vaillant in the iso valves
Etc
 
Most boilers have restrictions stops too much flow going through the plate and giving warm water

Baxi in the tails
Worcester in the plate/ pipes to the plate
Vaillant in the iso valves
Etc
Restricting to allow a 35degree rise is understandable.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.