Vaillant Plus 831 v Ideal Vogue Logic Plus 40KW v Worcester Si Compact 30 KW

[naut2k0]

We should all put a picture of are next gas boiler installation or combi swap what do u think.
It's easy to come on here and criticise somebody's work its not the best in my option but its not the worst I've seen either.
Applumbing I agree why have somebody in ure house u don't trust doesn't make sense to me get a few more quotes from other plumbing firms ( u can get a feel for somebody who would do a good job )
A person who says then can do everything alarm bells should have been ringing straight away
Don't mean to a offend just saying

Again, I did get several quotes (see first post) and I have full trust in his abilities. He doesn't do it all alone either. This is my first time that I've actually had a new boiler fitted, so I just wanted to seek experienced feedback from people on here (actually a friends recommended it ..!)

It's been an eye opener so I thank everyone!

 

[Ermintrude]

We should all put a picture of are next gas boiler installation or combi swap what do u think.
It's easy to come on here and criticise somebody's work its not the best in my option but its not the worst I've seen either.
Applumbing I agree why have somebody in ure house u don't trust doesn't make sense to me get a few more quotes from other plumbing firms ( u can get a feel for somebody who would do a good job )
A person who says then can do everything alarm bells should have been ringing straight away
Don't mean to a offend just saying

Defo a gr8 idea

 

[Ermintrude]

Again, I did get several quotes (see first post) and I have full trust in his abilities. He doesn't do it all alone either. This is my first time that I've actually had a new boiler fitted, so I just wanted to seek experienced feedback from people on here (actually a friends recommended it ..!)

It's been an eye opener so I thank everyone!

Have u found him on GS register?

 

[naut2k0]

Your fitter is a cretin. The filling loop is still wrong. Long one on cold short one on ch. is he blind? In the packet he got bits out of is a diagram, it's in the book, even the freakin valve is labeled.

Swaged joints are a bit of a strange one, a soldering westco 15mm coupler costs me 11p. Is lad gas safe? Just go on website and check .... Please for your and your family's sake!

Yes he is! I checked before, and I have just checked again.

 

[Richie_77]

Defo a gr8 idea

Que google images neat copper pipework

 

[Leo21]

I'm inclined to believe the op about the fitter. Yes it's a bit rough, but barring swapping a few valves and the boiler not falling off the wall I'm sure it'll be safe.
Iff his works that untidy I wouldn't have him do anymore work for me, definately not the kitchen. I can't imagine what will be hidden behind the units.
Jack of all trades master of none springs to mind.