Vented system to Combi

[Aire]

Given your initial question, and the very cheap quotes, I'm starting to suspect you may be doing alot of the work yourself.

 

[Old UKPF 108122]

You’re asking for professional opinion we are giving you professional opinion it’s way too cheap to be a quality job

I’ve not asked for any opinion on the price, I’ve employed many tradies over the last 5 years not to worry about it.

 

[Old UKPF 108122]

Given your initial question, and the very cheap quotes, I'm starting to suspect you may be doing alot of the work yourself.

I’m truly disappointed that you feel that way.

 

[shyguy2005]

Yes. As said gas is 22mm. Why would you think I should pay a plumber more than £450 for a day? Boiler is going in the same place as original and they need to do some alterations in the airing cupboard. Or are you all the 1k a day plumbers/brain surgeons.

So it’s one guy on his own?
What about other materials copper, controls etc?

 

[Old UKPF 108122]

So it’s one guy on his own?
What about other materials copper, controls etc?

I didn’t ask their arrangements. I have copper and controls.

 

[Aire]

Do You have boiler+ compliant controls?

 

[Old UKPF 108122]

Do You have boiler+ compliant controls?

Have a hive.

 

[shyguy2005]

Yes he has smart Honeywell trv kit in with that price too.

Do You have boiler+ compliant controls?

 

[Aire]

We're not trying to wind you up, but a combi conversion, (a proper one) isn't a days work. And anyone quoting £1500 for a boiler install is either in desperate need of the work or they're not registering/declaring the work.

 

[Old UKPF 108122]

We're not trying to wind you up, but a combi conversion, (a proper one) isn't a days work. And anyone quoting £1500 for a boiler install is either in desperate need of the work or they're not registering/declaring the work.

I’m sure you feel you are correct, but I don’t know why you would know more than 3 plumbers that have been in my property and seen it with their own eyes and come highly recommended.

What could possibly take longer than a day? Boiler goes in cupboard, gas already there, condense pipe straight through wall, hot and cold already there. Flow return already there. Airing cupboard, do the adjustments that I don’t know what is done because everyone wants to be a know it all instead of answering my initial question except for the helpful response from Scott.

Again, you must be the 1k brain surgeon?

 

[Old UKPF 108122]

Yes he has smart Honeywell trv kit in with that price too.

Rofl.

 

[chris watkins]

How big is the heating system ?
The residual head on the pumps in the large combi's often results in circulation problems.

I can almost guarantee you will regret installing a combi to do 2 bathrooms & if you don't replace the existing 22mm hot water pipe work with 15mm it will take so long to arrive the wife will not be happy.

And not so much of the brain surgeons - £1k remarks if you please. I might not be a surgeon but my skill set means I don't need to be chasing the kind of money you seem to think we are worth!

 

[SimonG]

DIY clever ****. Be a pleasure to work for, not.

Typical halfwit who won't be told.

 

[Aire]

I’m sure you feel you are correct, but I don’t know why you would know more than 3 plumbers that have been in my property and seen it with their own eyes and come highly recommended.

What could possibly take longer than a day? Boiler goes in cupboard, gas already there, condense pipe straight through wall, hot and cold already there. Flow return already there. Airing cupboard, do the adjustments that I don’t know what is done because everyone wants to be a know it all instead of answering my initial question except for the helpful response from Scott.

Again, you must be the 1k brain surgeon?

I wish I was but unfortunately I'm not a £1k a day brain surgeon. And don't take this the wrong way but you seem to be a typical customer who believes everything takes 5 minutes. I'm not saying I know more than the 3 plumbers who have viewed the job, but I don't have to to know that somethings off. I wouldn't entertain a combi swap for £1500 10 years ago, never mind now.

You supplying the hive and associated pipework could knock around £300 off the bill but even considering that, it's still cheap. I'll say again, we're not trying to wind you up but most if not all plumbers on this forum have seen the results of cheap work. Once you've paid them you will likely never see them again and will end up paying again to put the work right.
You didn't actually answer my question earlier though. Have they asked for cash?

 

[DGT plumbing]

I recon the boiler will be damaged from its fall of the back of the lorry it was on. Are all three of those plumbers you've had round doing it as it's only taking one day. Anyway must get back to my patient who needs his brain putting back in.

 

[ShaunCorbs]

Last one I did

Worcester 30i so around the same price as the 636

Took 3 days Boiler went in airing cupboard

Materials

Boiler
Flue
Nest
Maggy
Shock arrestor
Filling loop
4 lengths of 22mm
1 length of 15mm
2 lengths of 11/2 waste pipe

Plus odds and sods that you forget

Price was around 2.5k Mark

 

[Aire]

Last one I did

Worcester 30i so around the same price as the 636

Took 3 days Boiler went in airing cupboard

Materials

Boiler
Flue
Nest
Maggy
Shock arrestor
Filling loop
4 lengths of 22mm
1 length of 15mm
2 lengths of 11/2 waste pipe

Plus odds and sods that you forget

Price was around 2.5k Mark

3 full days or did you have time to squeeze in one craniotomy?😀

 

[Riley]

You crack on I’m out and less of the attitude to professionals who are giving up their time to you for free

 

[OffshoreGas]

I wish I was but unfortunately I'm not a £1k a day brain surgeon. And don't take this the wrong way but you seem to be a typical customer who believes everything takes 5 minutes. I'm not saying I know more than the 3 plumbers who have viewed the job, but I don't have to to know that somethings off. I wouldn't entertain a combi swap for £1500 10 years ago, never mind now.

You supplying the hive and associated pipework could knock around £300 off the bill but even considering that, it's still cheap. I'll say again, we're not trying to wind you up but most if not all plumbers on this forum have seen the results of cheap work. Once you've paid them you will likely never see them again and will end up paying again to put the work right.
You didn't actually answer my question earlier though. Have they asked for cash?

Craig deserves a lot of credit here for providing a courteous and helpful response rather than the ridicule/hostility from some others.

If the op has got three similar quotes from 3 gas safe plumbers it’s the industry that’s at fault here it the customer.

 

[sammathias]

Wise words, quickest way to find a weakness in a system that’s been operating barely above atmospheric pressure for 20 years is to shove 1.5 bar in it.

Yeah and have water Soding through the ceilings from various places due to Rubbish soldering. Seen it before. Always advise a full repipe. Even the hot water pipe too.