What radiator fits these wall brackets

[joeyh]

Hi,

I'm trying to find a radiator that fits these brackets, I do not know what size the original radiator is and the wall brackets have been plastered over making them difficult to remove.

Vertical distance between radiator mount points/slots 230mm

Horizontal distance between mounts 900mm

I'm guessing a 450mm high by 1100mm wide radiator should fit could someone confirm this for me?

Many Thanks for reading

 

[tolly]

Surely it cant be hard to break around the plaster to remove old brackets and then get a new rad of choice to hang.

 

[PlumbBobBob]

Surely it cant be hard to break around the plaster to remove old brackets and then get a new rad of choice to hang.

that would be my choice of action as well

 

[AWheating]

Post a picture. Ifs there off an old imperial rad you may struggle but you can always self tap some metal to the convector fins if needed.

 

[plumben]

Just remove the brackets and save the headace of trying to find a rad that will fit them,
you'll more likely end up doing that anyway

 

[jtsplumbing]

Go and buy a new radiator it comes with its own new brackets, is not just the distance apart but also the height of each bracket

 

[kris]

Rad brackets are a pain as each make has there own individual bracket and they cant be mix matched , so if you know the make then youl track brackets that way , or have a welder make a set ,

 

[gassafe]

Fit new rad & leave old brackets on wall or just remove old brackets as said before