What trade magazines do your read - and is there admin on this site please?

[plumben]

That looks smart.

Thanks,

Keep all my basic tees elbows straights then reducing fittings 15mm & 22mm clips and then most used fittings, washing machine taps, D.o.c and meter unions in them so I can see my stock and take the right amount of fittings into the job,

Then keep my other fittings taps rad valves flexis and conex fitting in the blue bins

 

[Riley]

Ive got tilt bins in mine

View attachment 23173

Are these tilt bins big enough for 1.25" & 1.5" waste fittings??

 

[Filplastic-Amy]

Are these tilt bins big enough for 1.25" & 1.5" waste fittings??

Hi Riley,

We stock the tilt bins so I can help if you need any assistance. There are two bigger units than those shown which have either 4 or 3 drawers. The overall unit width is 600mm regardless of how many bins are within it, the heights and depths differ though.

The tilt bin 4 is by far the most popular seller for us. We supply ours with the metal locking bar included, so if you're buying elsewhere make sure you include one to stop them falling open.

Any questions, I'm happy to help! I was trying to get an advert on here, but still no joy.. I'll keep trying though because it's a fab forum.

 

[plumben]

Are these tilt bins big enough for 1.25" & 1.5" waste fittings??

Ill see what I can fit in them later

 

[Subby]

PHPI professional heating plumbing installer mahgazine free at different trade counters , always have a read while im waiting

 

[dave1]

Hi Riley,

We stock the tilt bins so I can help if you need any assistance. There are two bigger units than those shown which have either 4 or 3 drawers. The overall unit width is 600mm regardless of how many bins are within it, the heights and depths differ though.

The tilt bin 4 is by far the most popular seller for us. We supply ours with the metal locking bar included, so if you're buying elsewhere make sure you include one to stop them falling open.

Any questions, I'm happy to help! I was trying to get an advert on here, but still no joy.. I'll keep trying though because it's a fab forum.

I've got your website permanently open at the moment just need to decide what I want.

 

[plumben]

Are these tilt bins big enough for 1.25" & 1.5" waste fittings??

I can get 3-5 fittings in the bigger bin
3 1.5" elbow could get 4 at a squeeze

So if you where going to use these for waste fittings i'd go for the bigger bin again defiantly

 

[Riley]

Hi Riley,

We stock the tilt bins so I can help if you need any assistance. There are two bigger units than those shown which have either 4 or 3 drawers. The overall unit width is 600mm regardless of how many bins are within it, the heights and depths differ though.

The tilt bin 4 is by far the most popular seller for us. We supply ours with the metal locking bar included, so if you're buying elsewhere make sure you include one to stop them falling open.

Any questions, I'm happy to help! I was trying to get an advert on here, but still no joy.. I'll keep trying though because it's a fab forum.

Thanks Amy I just want some sensible way of storing waste fittings. I don't like bags sliding around inside the van

 

[Riley]

I can get 3-5 fittings in the bigger bin
3 1.5" elbow could get 4 at a squeeze

So if you where going to use these for waste fittings i'd go for the bigger bin again defiantlyView attachment 23185

Cheers buddy appreciate the test

 

[Mrs Tara Plumbi]

I managed to guess the web address... Us plumbers are smart like that 😉

Looks a good outfit, there's always plenty of members on here showing off there new racking so should fit right in!

I spotted these too which Croppie might like...

View attachment 22676

I like those.