Whats the best way to clip 28 mm pipe and allow for big laggin

[Whyme]

You don't have to spend a fortune equipping with a length of 10mm rod, nuts and a assortment of rubber lined clips. you may never need them again but you'll be future proofed for chunky lagging.

 

[Ermintrude]

We now use unlined 104 to 114mm clips for flue clips. £3. Clip stud and malleable plate

 

[albatross]

Or lag the pipe then fix to wall with big clips like 63mm downpipe clips or similar.

 

[Chalked]

Flamco every time.

 

[SimonG]

Lag it and strap band it securely. Or munsen rings as said.

 

[TBServices]

Only issue with that is it's more difficult to access later on if you need to tee off or modify

 

[REDSAW]

Il be totally honest and say my first would of been what are bison beams....im picturing some migration across the Serengeti!!

you may find them in northern america!!!lol

beaming bison

 

[MOSSEP]

Although there are many ways to to do a job, using munson rings rather than plastic clips will make it look like a 'proper job'. You may only need a back plate depending on how thick you lagging is, 10mm male back plates make the pipe stand off from the wall quite a bit.

 

[kirkgas]

From BES, male back plate and extension if required