O
oldieone
[h=1]I am just about to fit Polypipe UFH Overlay House Pack 30m[SUP]2[/SUP], 3 Circuits from Tradingdepot.co.uk. as an under floor heating system. Although I understand and can fit the pipework back to the manifold together with the thermostat wiring I am lost as to what I need to connect to the manifold input. Being an electric flat only I was thinking that I could use a big electric boiler heated by economy 7 and topped up by day tariff where required. I’ve looked and see electric boilers and thermo stores but don’t understand them enough to pick anything. Therefore I hope one of you experts will advise me what heat source I should pick to give me maximum heating with the stored economy 7 whist having the safety measures to prevent it blowing up when hot.
[/h][h=1]Thank you [/h]
[/h][h=1]Thank you [/h]