S
Steve Minnis
Can anyone tell me what the nut is for on the side of the double check valve in the pipe leading to my outside tap? The valve is jammed closed and I wondered if it is possible to free it?
Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss Double check valve failure in the USA area at PlumbersForums.net
- Messages
- 34,367
- Solutions
- 2
Best to replace the broken / stuck part
Reply to Double check valve failure in the USA area at PlumbersForums.net
Similar plumbing topics
Hi
Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Newest Plumbing Threads
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 0
-
Need a reliable emergency plumbing or emergency electrician services
- Started by levi_shah
- Replies: 0
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
