Search the forum,

Discuss Help with identifying a shower runner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

chris corkill

Can anyone help with a query. I have moved into a new house and one of the runners on the shower door is broken. There is no name on the shower doors or the runner so i cannot identify what make it is. The only info is PA6 30007CH if anyone can help with the make and where I could get a new runner that would be great.

picture is detailed below
 
Last edited by a moderator:
Can U post a picture? I may have the odd one knocking about here I could sell you.

Many of the door runners are generic. You could start by trying one of the bathroom centres (such as the Plumb Center bathroom shop).
 
Hee Chris, i have the same problem Did you find a new runner somewhere because i dont know where to buy one.

Thanks,
Bob
 
Can anyone help with a query. I have moved into a new house and one of the runners on the shower door is broken. There is no name on the shower doors or the runner so i cannot identify what make it is. The only info is PA6 30007CH if anyone can help with the make and where I could get a new runner that would be great.

picture is detailed below

Hello Chris,

Did you ever get a spare runner? I have the same problem, being that one of the bottom peg runners has a split in it.

Thanks

Mark

Hee Chris, i have the same problem Did you find a new runner somewhere because i dont know where to buy one.

Thanks,
Bob

Hello Bob,

Did you ever find a replacement part? I have the same problem.

Thanks

Mark
 
Last edited by a moderator:
Sounds like an opportunity to create a fix for this then?!
 
there is a company called showerdoorrollers.co.uk that stocks many obsolete parts
give them a look up
 
Already different posts on the same subject however Yes useful intel none the less.
 
Status
Not open for further replies.

Reply to Help with identifying a shower runner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All As you can see from the attached pix, the flow control knob on my Bristan shower has broken. It was installed before I bought the house...
Replies
1
Views
270
my bathroom sink (installed 2017) was broken recently and needs replacing. on inspection there is no brand name and only a few markings so I'm...
Replies
1
Views
333
    • Like
Hi Can anyone identify the make and model of these taps please? We have one dripping bathroom sink tap but the plumber we had couldn't find a way...
Replies
3
Views
754
Hi all I had a new bathroom fitted about 4 months ago and all was fine until about a week ago. But now when I turn the lever to run the rain head...
Replies
4
Views
192
    • Like
Hi, I need some help on this shower drain installation. I’m about to install a corner shower kit in my basement bathroom. But I just found out the...
Replies
9
Views
755
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock