Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Low pressure (0.2 Bar) dual control mixer tap and bath filler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
3
Hi. We have been looking for a low pressure (0.2 Bar) dual control mixer tap and matching bath filler for our bathroom. The ones we like the look of are from Tavistock, Vado or Tre Mercati. Please would anyone on the forum with experience (good or bad) of these manufacturers taps give me some details (e.g. quality, reliability, spares, support etc.).

Would appreciate any help/advice.

Thanks in advance, Jim
 

Reply to Low pressure (0.2 Bar) dual control mixer tap and bath filler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I'm having a nightmare trying to find matt black wall or deck mounted bath mixer taps with 3/4 fitting that work on 0.2 bar. From tank to tap, I...
Replies
12
Views
413
S
  • Question
Does anyone out there have a JTP shower or JTP taps installed? (previously known as Just Taps Plus). Have you found a JTP shower and taps durable...
Replies
1
Views
3K
V
Hi, I'm looking for recommendations for good quality taps. Ones that will last. My kitchen mixer-tap is leaking after just 3 years, and it wasn't...
Replies
4
Views
2K
Hello - am hoping someone out there can offer some advice... I've been living in a split level 1st & 2nd floor masionette for two months, which...
Replies
6
Views
4K
T
Hi, I'm having a new bathroom installed and having issues getting the right bath/shower set up. Shower has to be over bath as no space for a...
Replies
4
Views
3K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock