S
secret squirrel
Should be a full bore valve, I agree with earlier post preferably lever valve, full flow none the less.
If I had seen this on a job I'd think diy. PTFE around olives only.
If you were taught ptfe around the thread can you explain the reasoning behind this.
Thats why it was £30 full bore lever valve is a fiver(ish)
If I had seen this on a job I'd think diy. PTFE around olives only.
If you were taught ptfe around the thread can you explain the reasoning behind this.
Thats why it was £30 full bore lever valve is a fiver(ish)