Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Jun 25, 2019
15
0
1
Member Type
DIY or Homeowner
Hi everyone,

Complete novice here. I have water droplets leaking from the ceiling in both of my flat's bedrooms. It's coming from the exact same spot in both bedrooms, which is in the gap below where I believe the heating/air-circulation systems are located in the ceiling of each room (see pics below, the water is dripping from the black circled areas).

We do not have radiators, only fan heating from the ceiling vents which also has a "comfort cool" fan setting. The water is leaking whether or not the system is turned on in the room.

IMG-3318-1.jpg


IMG-3319-1.jpg


In the utility cupboard, some of the pipes are condensating so badly that huge puddles are forming. The floor feels so cold and some of the pipes are almost freezing cold to touch. I've put a picture below; the pipe above the towel is the worst offender.

IMG-3322.jpg


IMG-3321.jpg


IMG-3320.jpg


Anyone have any tips or suggestions as to what this could be? Is it just a case of needing to insulate these pipes?

Thank you so much for any advice.
 
Thanks. I opened the access hatch in one of the rooms. The drip is coming from the copper pipes above this plastic pipe. They are really cold so presumably that is why they are sweating.

IMG-3326.jpg



IMG-3323.jpg

IMG-3324.jpg
 
Last edited:
So, to try summarise my whole issue, it seems that suddenly my copper cold water pipes are running with much colder water than usual and that, coupled with the warm weather, is causing all these drips? Do I just need to insulate them better?

Shall I try wrapping them in this?
 
Last edited:
I haven't any experience with that particular type of insulation but yes, anything that will adequately insulate the pipework will dramatically cut down on the condensation. I just did a cylinder cupboard the other day because of this same problem. I just used standard 13mm tubular pipe lagging and it did solve the problem. These cylinders were in an enclosed cupboard so I also got the chippy to add a vent top and bottom of the cupboard doors to improve circulation which I believe also helped.

Hopefully someone knows the lagging you linked to and will be able to say if it's any good or not if that's what you want to use.
 
Great, thank you very much for your input. Do you think I need to worry about why the pipes are suddenly so cold?
 
It looks to me that you have some kind of heat recover and humidity control system. Is there any equipment installed outside The property?
 
It's a flat in a 12 unit building. There are some Panasonic units on the walls outside on the ground floor?
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.