Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Sep 10, 2017
133
33
28
34
East sussex
Member Type
General Plumber
Hey guys long time since I have posted here but know some of you know your salt. I've got a job in a townhouse and currently the boiler sits on the second floor of a three story but I'm moving it to the ground floor as per client request, problem is, its got ridiculously high ceilings, I'm going to double check but suspect at the very least top floor rads are 7 meters up.. so I'm concerned about a standard 15/60 or whatever being man enough, I've been looking at the 25/80 as a viable alternative but I'll be honest I really don't have a great deal of experience in pump sizing, I'm usually just whacking in combis and forgetting about it 🥴 so I keep hearing that it'll make the system noisy and all these horror stories, just wondering if anyone could give me some advice basically. Current system is 22mm flow + return, currently open vented, 10 rads overall, I'm going to seal it and putting in a 180l unvented indirect. Also, client is a bit of an eco warrior so they want me to put in electric, electric boiler needs 12lpm minimum according to Mi's. Cheers
 
thanks for clearing that up, i wonder when i see insta photos of 2 magna 1's and a llh on a 5 bed house whether its overkill, now im starting to think yes, yes it is... that poor customers wallet.

LLH's or any other means of hydronic separation is used if
1. Pump internal to boiler can't supply the head to the entire circuit/circuits.
2. If the flow rates on the secondary side are more or less than that the boiler requires.

Some may disagree but as systems become increasingly modulation controlled then most systems out there will benefit/need some kind of separation. Although if this can be designed out at the designing stage it's better.
 
Not had a issue with any I've fitted had more problems with Grundfoss pumps as the guys have stated system design has alot to do with it , even a electric boiler manufacturer state in their literature that they should only be installed if not on a gas network and in smaller properties , you know it will all be your fault when it under performs and the bill goes through the roof, 12kw the supply for that needs careful consideration and may not be possible with the rest of the house.
Screenshot_20210705-211946.png
 
Last edited:
Not had a issue with any I've fitted had more problems with Grundfoss pumps as the guys have stated system design has alot to do with it , even a electric boiler manufacturer state in their literature that they should only be installed if not on a gas network and in smaller properties , you know it will all be your fault when it under performs and the bill goes through the roof View attachment 62183

have you used there pumps kop ?
 
Not had a issue with any I've fitted had more problems with Grundfoss pumps as the guys have stated system design has alot to do with it , even a electric boiler manufacturer state in their literature that they should only be installed if not on a gas network and in smaller properties , you know it will all be your fault when it under performs and the bill goes through the roof View attachment 62183
I have told them numerous times that it will be very expensive. I think I'm absolved to any blame at this point. 12kw should handle the rads no problem but yes the bill is going to be eye watering.
 
I had a similar customer, who had done online research and thought electric would be a great idea to future proof the house. However once I went through the cost of install, running and the fact that most electric units are only carry a 2/3 year warranty he soon agreed to a replacement gas boiler.
 
just one more point do they cook on gas or leccy, power cut no heating or cooking.
yes i know ,,, no leccy no heating even if you use gas, but!!!!
thats my pennys worth now,..
 
  • Informative
Reactions: king of pipes
Consider the personality of the customer, this job would be ringing alarm bells for me - remember sometimes a job is not worth doing from your point of view and it’s best to walk away.
If it’s a job you’d not wish your name to be associated with, for example when they start telling people that their bills have gone mad since you fitted the new boiler etc - just don’t do it.
 
  • Like
Reactions: cjg
Personally I don't think the power supply will be adequate for heating, hotwater, cooking , a kettle, computers TVs , gaming and to top that probably a charging point for a car or two if not now then in the future, I'd be getting a calculation done allowing for a -2- 3 degree temperature outside for a week or two and all these appliances loading it will be a mind blowing and a game changers I guarantee, take some Viessman boiler information with you these are designed for the changes coming to the Natural gas supply, the future is Hydrogen Natural gas mix the co2 produced from the combustion process is vastly reduced it's being trialled and tested in parts of the UK now that the future and the way I would be pushing this customer is this direction , or saying sorry I'm out . Kop
 
  • Like
Reactions: cjg
Only a years warranty and a D sebuk rating , I wish you well with it bud but alarm bells are ringing for me anyway. All the best kop
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.