Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Oct 23, 2019
5
0
1
Member Type
DIY or Homeowner
My 10 year old Vaillant Eco Tec Boiler pump/fan occasionally turns on for 10 secs when the cold water supply is turned off at the tap or toilet after use. If the tap is turned off slowly, it doesn't happen. Any suggestions please?
 
Needs a non return valve and a shock arrestor fitting as the shock wave (from shutting the tap) is triggering the flow switch
Sorry but just seen your reply and thanks for it and your interest. Where should these be fitted near the boiler or incoming supply? Thanks again
 
You possibly have a dead leg on the hot water system somewhere. Getting rid of that would more than likely stop the problem.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.