what flue gas analyser ?

[pipefitter]

Recently got the kane 455 & liking it

 

[ndsmith]

I also got a Kane 455 a few weeks ago, I like it a lot. Would recommend to anyone

 

[buckley plumb]

scared to switch my anton back on it went well off the scale the other day when setting co on glowworm and the battery ran out while purging 🙂

 

[jfb]

Kane now guarantee thier analysers for five years. They also guarantee the cost of calibration during the guanantee period.

 

[Richie_77]

I have the Kane 455 cpa1 kit can't fault it.

 

[Derek Hardman]

I have used Testo, Kane and Anton, I prefer the Anton, got my first Anton about 7 years ago, replaced it for the newer sprint v2, when i needed more for other engineers i bought the v2's again, easy to use, durable, if I have any problem it is the length of time taken to recalibrate and get it back.

 

[stoker122]

I have used Testo, Kane and Anton, I prefer the Anton, got my first Anton about 7 years ago, replaced it for the newer sprint v2, when i needed more for other engineers i bought the v2's again, easy to use, durable, if I have any problem it is the length of time taken to recalibrate and get it back.

Have you GES in Welwyn Garden City? They have a pretty quick turnaround 🙂

 

[Reza]

So if you're considering to buy an analyser, here are some facts which helps you decide which unit to go for. The main two analyser on the market are Kane 455 and Anton Sprint V2. Anton utilises electro chemical O2 and CO sensors which have a shelf life of 2 years and 3 years respectively. The O2 sensor will need changing after 2 years as it depletes whether the unit is in use or not. The cost of exchanging the sensors including a calibration of an Anton analyser is £175 +vat (today) and the turnaround is 7 to 10 days as stated but has been reported to take as long as they like it to take! The Kane 455 utilises infrared CO and O2 sensors which lasts 5 years so upon the sixth year, they need replacing.The cost of exchanging the sensors including a calibration of a Kane analyser is £145 +vat (today) and the turnaround is same day if you take the unit in yourself or 1 to 3 days if posted. I know which one I would go for, but here you have it, just thought the information may of some use to you.

 

[Reza]

You use a V2 Derek! That's shocking..lol

 

[bob99]

I have only ever used a anton fga, never really had any problems, its an expensive bit of kit, and I would recommend it. [DLMURL]https://www.amazon.co.uk/dp/B005DEXU1E/ref=as_li_qf_sp_asin_til?tag=earnitonline-21&camp=1406&creative=6394&linkCode=as1&creativeASIN=B005DEXU1E&adid=1H8YMWWWHVDRPKMK757V[/DLMURL]&

 

[paul13899]

We went for the Kane 455! EXCELLENT bit of kit!

Wirral Plumbers, Heating and gas engineers - PD Services

 

[lairdplumbing]

I have the Kane 425 with all the extras, had it for 5 years it is very simple to use.

 

[buckley plumb]

how do I stand doing landlord certs without my analyser never been without one but not getting one until next wk

 

[zutman]

Just think how we did landlord tickets before ? If its not a condensing boiler you can run all the checks without one, i run all my checks first the old way and then use the analyser to back up my findings not keen on just using a machine to service a gas appliance, last month i went to look at a boiler that was acting strange british gas had been to service it the week before only using an analyser and the reading were ok, i took the front of the heat exchanger and bingo half full of carbon so dont worry to much about the analyser they can give false readings.

i use a sprint very easy to use but expensive to maintain, but havin said that if its paying its way then it dont matter

 

[hammers4spanner]

analyser will give false readings if not calibrated imo

however i still do a full check up gas rates etc etc then analyse myself

 

[Reza]

I was advised by GSR that if you're testing a non condensing boiler, you may not be required to record your ratio. Then again, they weren't fully committed to their words when they said it. Leaves a get out claws if you catch my drift.

 

[hammers4spanner]

get out clause and gas safe ,,,,,never !!!

 

[Reza]

They even have planted that concept even in their recorded message, only they don't call it a get out claws!

 

[Reza]

I haven't got all those pretty pictures under my name! Sorry a bit new here! :cyclist:

 

[AWheating]

you dont need to do any fga readings on a landlords cert, unless the appliance manufacturer requires it.

 

[lance]

had a testo, prefer the kane.

 

[heatseek185]

I just bought a Kane 455 CPA1 Kit from BES, can someone please tell me when the first calibration is due, would it be 12 months after the date of purchase or 12 months after the date on the Analyser Test Report which reads 30/01/2013 ?

 

[mutley racers]

It will tell you on it. One of the buttons to the left of the ratio. Menu maybe. Cannot remember

 

[heatseek185]

I found it thanks, it's under status: 280 days.

 

[Trev]

I've got a Anton Evo2 and love it. Had a Sprint 2 before this. Tryed kane before but the printers take forever on them and the screens tiny unless you folk out for the decent model. I'll recommend Anton's any day of the week!