Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Recent content by FG28

  1. F

    Milwaukee SDS Cordless

    Iv just got the m12 sds, for anything up to 10mm its unbeatable IMO, anything larger and itll foook it, so need the elec or an 18volt i guess
  2. F

    Full bore isolating valves- which way round to fit?

    Fall to off i usually go for
  3. F

    Copper or 'Plastic'...??

    Copper for sure but got too keep whacking in the plastic Keeps the work flooding in as its rubbish For sure it has its uses , i heard that over 10-15 yrs the expansion and contraction on the plastic in tight wooden joist holes will wear it away ? Not sure how true that is , but if it is , yrs...
  4. F

    OK for waste to run uphill a short distance?

    Great job mate What a clown , didnt even figure of six the silicone , The tiles and silicone finishing seal will cover them chips around the tray , All in all id say your good to go , bit of ply and a nice neatish hole for the waste , Id def spend a tenner on some ct1 or sticks like , for...
  5. F

    Running gas pipe under concrete slab

    Im not so sure they like it in the concrete ? Opening up a real can of regualation worms Can you not lay concrete then run into the screed ? Much simpler ? Or go with the gsr s idea ?
  6. F

    OK for waste to run uphill a short distance?

    Its amazing isnt it How the hell do you achieve that , look at the slithers in the corner ,. Im pretty sure its harder to do what they have done than do it properly in the first instance
  7. F

    OK for waste to run uphill a short distance?

  8. F

    OK for waste to run uphill a short distance?

    Great well sounds like they know what there doing Tile adhesive IMO is better than sand cement and will be fine ,. You can manufacturer and they will say its fine , im fairly certain of that , Yea sorry i put that pic up really to show the push fit monkeys about that still cant even do that...
  9. F

    OK for waste to run uphill a short distance?

  10. F

    OK for waste to run uphill a short distance?

    Ever since john guest popped up everyones a plumber , thats the problem ,
  11. F

    OK for waste to run uphill a short distance?

    heres a pic of a resin tray i had to take out as it had failed , installed on chipboard floor and siliconed down The end result after approx 14 months in a rented property Up to you mate
  12. F

    OK for waste to run uphill a short distance?

  13. F

    OK for waste to run uphill a short distance?

    He needs sacking Osb floor , seriously got to be a wind up this Siliconed resin tray , against all mi s which in turn foooks the guarantee which will no doubt come back to haunt you Did he pva the osb before laying it or did he bosh it straight onto dusty osb Are the walls aqua paneled or...
  14. F

    OK for waste to run uphill a short distance?

    If its a resin tray it HAS to be cement or a rapid set adhesive , there are quite a few that can be put down using mastic but i would not use a normal silicone , something like CT1 or sticks like , 2 very good grabs adhesives , Id google your tray fitting instructions if he hasnt left them...
  15. F

    OK for waste to run uphill a short distance?

    fitted bathrooms for years before doing the gas and now do the occasional one or two , All i can say is Not even nvq1 level ,. It will all work but it just looks horrific ,, Be very intrested to see the finishing ,? Is he tiling it too Aqua panel or similair used around shower area ...
See more

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top