Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

  1. A

    Selectos D42/A Burner - damaged?

    Hello. I've a Selectos D42/A burner in an Trianco boiler. I've been told that the 'nose' of the burner (fire tube?) is damaged and that I need a new part (unavailable) or a new burner. I've looked on the internet for a photo of a 'good' one without success but I did find a couple of diagrams in...
  2. C

    wood burner boiler

    sitting looking at weather overnight temperature drops and thought - what is the equivalent to a frost thermostat protection on a wood burner boiler. Clearly its damped down over night or even let go out til next day but what stops any sudden drop in temperature affecting a place in any part of...
  3. N

    Burner motor to Oil Pump Vibration

    Hi I've fitter new motor to Inter 2011C burner which drives Danfoss BFP 11L3 oil pump. motor bearings are good fan rotates freely and without wobble. There's a vibration noise from the pump coupling area which I just can't seem to solve. If I slacken the pump mounts and move it slightly noise...
  4. R

    Back burner

    I have a pressurised heating system in my house,wanting to put in a wood burning stove and wondering can I put one in with a back boiler to heat the water only-not radiators? I'm not going to attempt myself but after getting both yes and no answers from plumbers I'm baffled. Help please?
  5. R

    Back burner

    Hi all.i have a pressurised heating system in my house and wondering if I can fit a wood burner with a back boiler that heats our water only-not radiators. Any help greatly appreciated, thanks
  6. Deleted member 32524

    Vokera option no gas through to burner

    Hello. Been at above and have continuity @ overheat stat, sparks then goes to lock out. No gas @ p2. Ta, Duncan
  7. D

    what is the best alternative to eurocal monoflame minor 1 burner

    i am planning to replace my 20 year old trusted oil burner for something more modern. i am unsure if i should install a riello RDB or a bentone/sterling burner ?? i have a boiler house casing, so anything should fit , space-wise. i am worried about blast tube size or if the distance from nozzle...
  8. R

    Ideal Classic burner box seal

    I went on a breakdown call yesterday and I had to replace the fan on an Ideal Classic FF250, which I did, but whilst fitting I noticed that the seal on the burner box wasn't complete and I checked it for CO with my FGA. It's giving out 29ppm so I've turned it off and informed the customer, who...
  9. W

    Riello RDB burner motor running but not firing - tip

    Had this come up again last week, and just wanted to pass on this tip: If you come to a Riello RDB burner which has the motor running but does not attempt to fire, or takes a long time to fire, it can either be the photocell or the motor. Most often it is the photocell. To test, pull the...
  10. J

    Oil Burner Housing Lock size

    Hi I'm new here so hopefully I have posted this in the correct section. I have oil fired central heating with small galvanized housing outside which houses the boiler and oil burner. The oil delivery man had to bleed the system last time and I lost the key so we forced the door off. I'm looking...
  11. M

    Swirl burner for rothenberg

    What is the jet that comes with the Rothenberg swirl burner nozzle?
  12. A

    Ideal classic 260. sparks, burner lights for split sec on and goes out. repeats.

    Anyone familiar with this boiler and come across something similar before? The tech guys said it must be an external control. I'm not so sure. New fan put in 3 weeks ago. Colleague thinks pcb or gas valve, leaning towards pcb. I have ordered a few different parts so hopefully its one of those.
  13. J

    linking mf burner & gas system

    Im fitting a new heating system to my house Im gas safe registered & plumbed a few multifuel burners, but never mixed the 2 Can I use a low loss header on the mf side to transfer the heat over to the flow on the gas system. I appreciate the need of extra pumps, pipe stats, check valve, its just...
  14. stani

    Log burner

    Does anyone have an idea of the possible manufacturers of this stove?
  15. U

    Direct fired gas burner issues

    Hello Hope some one on here may be able to help with a few queries i have regarding the law and regulations regarding some plant. Essentially the Direct fired burner is mounted in an air stream inside of an AHU which is dehumidifying the air. However there are two air streams. One stream...
  16. M

    superfire 2 burner tube

    Do the sell Rothenberg superfire 2 spare burner tube in most plumbers merchants
  17. Inverness

    Worcester danmoor oil boiler heat only. Lock out burner

    Hello. my aunty heating has stopped working. im only in my 2nd year doing a svq3 plumbing and heating. i went over to have a look if I could fix it. i firstly checked oil tank is full. I called for heating but boiler didn't fire up. i opened up boiler case and pressed the burner lockout button...
  18. D

    Oil boiler/burner trouble

    Hi there, long time lurker first time poster. I have an external grant boiler with a reillo rdb burner. My tank ran dry last week got it topped up yesterday and so my trouble began. I bled the burner as I normally would. Heating fired no problem went back into house and realised the...
  19. W

    Alpha cb28x red led burner light failure

    Hi can someone give me some advice please, I've got 5-6 year old alpha cb28x. I've sent the pcb away recently as the fan was failing to start and came back repaired and worked fine. but now keep getting a solid red led, failed to light, I've got 230v from the gas valve terminals but the valve is...
  20. J

    Ideal icos boiler, no hot water, flashing burner light

    Hi, New to the forum, with limited plumbing / CH knowledge, so any assistance would be greatly appreciated. My set up - Ideal icos boiler, Siemens RWB29 programmer, Siemens thermostat, Megaflo CL170HE water tank. Already installed in my home (roughly 8 years old) which I purchased a year ago...
    • JackA2288
    • Thread
    • boiler burner hot water ideal water
    • Replies: 10
    • Forum: Boiler Advice Forum

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top