Hi, stupid question but can anyone help...?
I had an F22 message on my ecotec pro 24. From what I've seen online I understood I had to use a screwdriver on the valve at the top of the filling loop (my filling loop only has one handle) but there isn't anywhere to use a screwdriver.... Just...
Hi, hoping someone out there can help.We have a Danfoss HIU. The pressure is down and have been told to fill the system. I've connected everything as shown in the pics but the gauge isn't budging.
[/IMG]
Hi,
I have attached a link to a video of my storage tank filling, is there a different filler I can use to allow a faster flow of water as our shower pumps water faster than it can fill. Upgrading to a larger tank would be a massive headache! I have removed the pipe to the filler and it has...
Hi All,
Today was sat at home and heard a pop from the kitchen, went in there and had water gushing everywhere from a burst on the flexible hose thing that connects the water supply to the boiler via the filling loop.
Managed to turn off the water at the mains after a couple of minutes as...
Hi guys,
I have a Boulter Camray 5 combination oil boiler (quite old I think).
Recently I bled the radiators and then the next day was woken by a horrible noise from the boiler. I think the pressure drop caused it(?). Anyway, I rectified the issue by using the filling loop to restore...
Hi there,
I have an F22 fault on my boiler, we only moved in recently and had a radiator removed for some work to take place on the wall behind. I am presuming this has reduced the water pressure in the boiler which is why we are without central heating.
The help guides and videos I have...
You amazing bunch were able to help me out greatly a few months ago and I’m hoping you will be able to do the same this time around.
7 months ago we had a new boiler fitted and had TRVs added to 3 out of 4 rads (we decided against the kitchen one closest to the boiler as we will be remodelling...
Hi
I recently moved into a new house which has a Worcester greenstar 34 CDi classic combi boiler, which has a keyless filling link.
I tried to top the pressure up by using the blue lever, but when I do water starts to come out of the back flow relief port (out of all 3 holes). So the only way...
Hello - this is my first post on the forum. I'm looking for some help with an issue we are facing in the house today.
Problem:
Over the past few weeks we have noticed that our hotwater hasn't been red hot, instead only luke warm. Additionally the radiators would turn on and off intermittently...
Hi
Self confessed novice here!
Radiators at the top of our house are cold, the rest are fine. Only second winter with loft extension (where cold radiators are), last winter same thing happened but the builders were still here and they topped up system after we drained air from cold radiators...
Customer hadn't seen one and proved tricky to locate.
I know some are topped up from underneath with a couple of switches or whatever which I've managed to suss out before but couldnt spot anything for this one so I'm thinking it must have a loop somewhere else? If so I'll tell him to get...
His guys, I have a monza 24 combination boiler which I know nothing about but I know the pressure is very low. I've looked for the filling loop taps but can't find them. The filling loop is there but there are no taps on them. I'm a bit puzzled now on how to increase the pressure. There are...
hi everyone, im a diyer in need of some advice. the job i need doing is to fit a new basin and bath. the system i think is a vented one where i have a header tank and a storage tank with immersion.
on the sysyem i have a rayburn with a drain on it. my question is can i turn rayburn off run the...
Hi everyone,
I would like some help with an issue I have. I had a extension done last year with building control all certified.
Over the past 3 weeks the water in the sink has not been draining quickly after taking off the kitchen cabinet plinth, I can see the problem the builder used 40mm...
Hi all,
I have recently had a new Boiler (Vaillant Ecotec 630 + Gledhill 210L) with powerflush.
When the engineer was doing the powerflush, and all radiator valves were closed, he said that there was still flow, so there was an abnormal loop and therefore my efficiency would be low.
3 of the...
Hi All, I've just had a new gas fire and fireplace installed and I need to fill a hole of about 6" x 3" on the wall, I can see the gas pipe. Which is the best way to do this? I was thinking of somehow protecting the gas pipe then filling it in. Any advice would be appreciated, I am a total...
I have a main Eco 30 that i am working on and the Filling loop needs replacing.
OE is £60. There are a few online around £30 (4 day wait) or I can use a flexi.
Just wondering which way to go here.
Also it is always advised that flexi's be removed - WHY since the fixed one obv isn't.
Hi there, hoping someone can help! The last couple of days I have noticed that my toilet has been slower to fill back up, after being flushed.
I have attached the video of the issue which will hopefully help with finding out what the issue is and whether it is a 'simple' enough task for me to...
Hi, I've got a Potterton Promax He Store boiler and one of the valves is leaking on the filling loop when it's closed. Doesn't leak when it's open. Other valve isn't leaking externally but must have a slight problem in the valve it's self as the pressure is constantly rising.. Is there any way I...