Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

ideal logic

  1. A

    Ideal logic + Heat 18

    Afternoon all I was just wandering if the Ideal logic + heat 18 has a build in frost stat.
  2. D

    Ideal logic 30 frost stat

    Does anyone know if the logic 30 has an internal frost stat?
    • Deleted member 94038
    • Thread
    • ideal ideal logic logic stat
    • Replies: 11
    • Forum: UK Plumbers Forums
  3. S

    Ideal Logic + heat 24 fault code FA

    Ideal Logic + heat 24 fault code FA I understand it’s a Flow direction fault. Meaning the incoming water is hotter than the outgoing, but the boiler has been installed for more than 7 years and its only just started happening… Could this be a faulty pump or thermostat? Any advice would be...
  4. A

    Ideal logic plus 30 ABV & Super Efficiency (not)

    Three questions for you experts. I have had an Ideal logic 30+ combi installed, unusually retaining the tank so it's direct feed to the downstairs taps and in a S plan configuration to the pre existing hot cylinder. To complicate things further I have a second zone which is underfloor heating...
  5. T

    Should Ideal Logic Combi ESP1 35 show demand for heat when thermostat esrpt4 doesn't need it?

    Hi all, I've just moved in to a new build with the above boiler and two thermostats (one upstairs, one downstairs). The other day we had an issue where the heating upstairs stayed on no matter what the thermostat said, I managed to factory reset the upstairs thermostat and since then the rads...
  6. F

    Repressurise Ideal Logic 15 Boiler

    Hi, please can someone help. I just moved into a new house and the boiler needs filling up but there is no filling loop. The previous owner did mention how to do this without a loop but I can't recall. I do remember going to the tank upstairs and next to it is a knob which you have to turn after...
  7. S

    Ideal logic 35 banging

    hi guys, Had a quick look at job this evening was a ideal logic combi 35. When running for hot water makes a thumping noise. Have cleaned out condensate which defo was blocked up so clearly boiler has never been serviced. Boiler is about 6-7 years old . Going back Wednesday first thing to have...
  8. A

    Ideal logic mechanical timer

    Ideal logic mechanical timer.. New. Collection from stalybridge greater Manchester. [email protected]
  9. Z

    Ideal logic combi + fault display

    How do you bring the fault codes up on these? Going to look at a friends later they need to reset it everyday. Will probably be L2 or L1 as it mostly is on the logics. They are saying they can't see a fault code on the display when it needs to be reset. I could with knowing the code so I can go...
  10. A

    Ideal Logic heat 24 fan - cycles on and off all night (when in an off mode)

    Hi, I have an Ideal Logic Heat 24 boiler, but even when in off mode on the programmer, it constantly starts the fan up for a few seconds and then shuts down again. Any ideas please? Not good for light sleepers!
  11. M

    Ideal Logic Plus 24

    Hi, I attended a Ideal Logic Plus 24 today and although there was no fault code, the DHW was reaching a max of 52 degrees. Looking at the service book it doesn't have a DHW thermistor. Can anyone please tell me what regulates the temperature? Thanks
  12. A

    Ideal logic 30 combi. HW issue

    Hi, tonight's job is as follows. Cust has just bought the house and not moved in yet, currently decorating. Been to look at their ideal logic 30. Boiler in the kitchen. Shower is a thermostatic bar. Water runs Luke warm. Basin runs a bit better but runs cooler the higher the flow. Bath hot tap...
  13. F

    Ideal Logic Combi 30 timer/thermostat issue

    Hi all, hoping someone can help. Bought our flat in October and it had an ideal logic combi 30, all seemed to be working ok until I noticed the timer wasn't ticking. It has a mechanical one fitted in the front. So I ordered a replacement online, plugged it in and off she went. The only...
    • flyingguy
    • Thread
    • combi ideal ideal logic logic thermostat
    • Replies: 4
    • Forum: UK Plumbers Forums
  14. J

    Ideal Logic 15 Rumbling noise

    I have an Ideal Logic boiler. Recently it started making a rumbling noise every time it starts up. Noise is loud and can be heard from outside.. Can anyone help me.
    • jtennyson
    • Thread
    • ideal ideal logic logic noise
    • Replies: 1
    • Forum: UK Plumbers Forums
  15. N

    Ideal Logic Combi 35 - leaking around siphon trap

    Hi, I noticed some dripping from my boiler today and upon investigation I can see that it has been leaking around the siphon trap holes at the bottom of the boiler. I took the front off and the siphon which was quite dirty with some greyish grit in the 'sump like plug' at the bottom. After a...
    • neildon
    • Thread
    • combi ideal ideal logic leaking logic
    • Replies: 6
    • Forum: UK Plumbers Forums
  16. jaydebruyne

    Ideal Logic Service Notice

    How do I get rid of the service alert on the display on a logic +?
  17. F

    ideal logic 24 L1 fault

    hi all, i got L1 come up om my ideal logic 24, just got a new return them stat which i have not fitted yet as away for new year, but i have check it on a oms meter and must say not a lot of differance, pump turns ok , so hoping this new stat works,,, if not any engineers local to portchester...
  18. F

    L1 fult ideal logic help plse

    hi all, i got L1 come up om my ideal logic 24, just got a new return them stat which i have not fitted yet as away for new year, but i have check it on a oms meter and must say not a lot of differance, pump turns ok , so hoping this new stat works,,, if not any engineers local to portchester...
  19. G

    Ideal Logic + 24 Problem

    Hi guys, so quick question regarding an ideal combi... The boiler has been loosing pressure and gradually been getting worse. So last week i decided to replace the worst rad in the house and pop a can of fernox in the system whilst I was at it. Picked up a replacement PRV yesterday as I was...
  20. Kewat66

    Ideal Logic 30 L2 code

    Hi All, i have an issue with Logic 30. Keeps coming up with L2 fault code. Have checked gas pressure, cleaned out condensate and still no joy. It runs through the sequence but will not fire. Anyone know of any simple or common faults on these? Thanks kewat66

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top