Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

ideal logic

  1. N

    Ideal logic 30 pressure problem

    Wondering if anyone can give any advice, we've had the above boiler for about 3 years now and apart from the odd pressure top up it has been fine but now we are having problems stablising the pressure. last week the hot water wasn't working so I topped it up to 1 bar - everything started...
  2. S

    ideal logic 30 problem

    hi guys, i need some advice please my combo boiler is driving me mad i have had three different engineers out to look at it as it was making a loud humming noise they all reckoned they fixed it but did not, so i started searching for advice as my hot water was not heating up properly but the...
  3. Scott_D

    New ideal logic

    Fitted one today Its a bit lighter It looks a bit more 'vogue' It has a vogue style user interface They have made some nice upgrades, I didn't have loads of time to play around with it but it is still s good boiler for the money.
  4. S

    ideal logic + 30 combi boiler

    Hi if someone can help I have just replaced the main pcb on this boiler everything was ok switched the boiler on via the instructions 99k pcb replaced reset turned to reset and nothing is happening they are genuine logic parts.I am not a plumber but i am a sparky.The codes match up for the chip...
  5. C

    Ideal logic expert advice

    Hello I have a Ideal Logic heat plus 18 about 2 years old. My work colleague bought an ideal logic heat plus 12 brand new never fitted which is now surplus and he has offered me it for free. I am thinking about keeping it for spare parts can anyone tell me what parts that wont be...
  6. K

    Ideal Logic Plus 30 - loss of pressure

    Hi , you all have probably seen this problem but as im new to this i cannot seem to find the solution. We have an Ideal Logic 30 Combi boiler 4 years old and we are having to top up using the filling loop almost every other day. My boiler engineer assures me its not the boiler at fault although...
  7. C

    Ideal logic boiler question

    Hi all I have had a ideal logic plus boiler for over 2 years now and it's been perfect. I have had it serviced every year and the book has been signed and dated etc so it's all OK. The problem is that last time it was serviced the guy has forgot to reset the date on the boiler and now it's...
  8. C

    Ideal logic 30 combi

    Hi all I've just had this boiler fitted from a gravity fed one only problem I have is I don't have a room st at to control the heating what I would like to know is are they easy to fit and also I have been looking at the hive one can they be fitted thanks in advance
  9. M

    Ideal logic 30 - strange pressure issue

    Hi guys, i had my Ideal logic fitted just over 2 years ago and apart from a fan swap I've had no issues until now and I don't even know if this is an issue, let me explain. i know or guess that I've got a very slight leak in my piping but think it's under a floor somewhere as I've I get air in...
  10. G

    Ideal Logic + no hot water

    Called out today to above boiler. Heating fine but no hot water. Hall sensor is flasing red when demand for hot water but thats it. the motorised head moves fine for central heating but nothing for hot water. Could the head still be faulty if it moves for heating? any help appreciated.
  11. quality

    Ideal logic

    Hi does anyone know the dimension for a Logic 30 combi from the center of the flue to the Wall plate (Back of the boiler) cheers
  12. C

    Ideal Logic 30 - Not Working after removing Condensate pump

    Hi Guys Re decorating the kitchen and found an external gully almost directly under the boiler location. Apparently the previous owner/installer didn't realist was there, because they ran the condensate into pump/trough and then up into the roof space and over to the kitchen sink! I have...
  13. D

    Hot water but no central heating - Ideal Logic 24

    We had this problem a few months ago, where we had heating but no hot water, and the problem was solved by one of the methods (not sure which as we did all of this at once and it could have been any of them or none of them) - I changed the batteries in the (Honeywell wireless) thermostat...
  14. G

    ideal logic 30 fault

    Hi guys, I changed a pcb on an ideal logic 30 as it was stuck on l2 fault, after testing and getting no power at gas valve. I got it all going fine, apart from on hw. When you run the tap nothing registers on the boiler, I took the turnine out and checked it was moving freely, but im not really...
  15. Simon F

    Ideal logic 12 rear flue repair

    Am I right in thinking that to get the flue out of this boiler, the boiler needs lifting of the wall to acces the support bracket. The flue is connected to this, there is no other way of getting to the flue?? it is currently dripping at the seal/conection in the back of the boiler.
  16. M

    Pressure Loss Ideal Logic 18

    Hi I am losing about 1 bar of pressure a day on my heating system. I have read loads of posts with suggestions about what the problem could be. There are no obvious leaks although unable to check hidden pipework but no obvious damp patches etc. I have tried to check whether the pressure...
  17. L

    Ideal Logic in disguise

    Hi Guys Just after a few pointers not really done a lot of faultfinding on boilers but been too a friends who has a ProCombi Exclusive installed in his house. Which i believe is just an Ideal Logic, he realized that the pressure was dropping around 1 BAR every week. He has kept a keen eye out...
  18. R

    Ideal logic plus 24kw flame loss

    Evening all Went to this boiler today reset it then checked it with the fga gas working pressure with hob also running cleaned electrodes made sure the flue was clear emptied condie trap water pressure cleaned out the sprio filter gets home customer calls again boilers displaying same...
  19. G

    Ideal Isar pressure gauge on an Ideal Logic...

    Hi, has anyone used an Isar pressure gauge on a Logic? Spoke to my local plumbers merchant and the bloke said the local council do this when they can't source parts for the Logic. The part numbers are different but he seems to think they're compatible. Asked Ideal and they just stuck to...
  20. S

    F1 fault code on a Ideal Logic combi 24 boiler

    So a f1 fault code appeared today on my boiler and I looked in the manual which said it was a pressure problem. I reapplied the pressure so the gauge read 1.5 and then bleed the radiators. The pressure originally read 1.2 There was a lot of air in them which drained the pressure gauge close to...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Back
Top