Hello
I am fitting a kitchen in a new room without services. Looking to tile the floor so everything under the tiles really needs to be fit and forget.
Looking for best advice on fitting drainage for the sink and dishwasher please.
Photos of situation below. Sink will be under window and...
Hi,
I have noticed the hot water faucet under the kitchen sink is leaking. It seems to be leaking underneath the cupboard.
The flexible connection was recently changed.
Also there is a portable washer that is being connected to the sink sometimes. I am not sure if this has anything to do with...
Hi all
We have an issue with a kitchen tap it seems to run hot and cold or Luke warm all the the other taps in the house are fine it’s just this one tap. It is a mixer tap and the combi boiler is about 2 metres away. It’s a Worcester greenstar. Is this an issue with the tap itself or something...
We had a hard freeze here in Louisiana last week. We are back to warmer temperatures outside now 71•degrees. All my faucets and showers are able to run water except for my kitchen sink faucet. My dishwasher even works. Just one single drip of water every 5 seconds out of my kitchen sink faucet...
Hi all. Any suggestions on what trap/fittings to use on a sink as I need to turn 90degrees as soon as I can? The sink is moving into a unit with space very limited and I can’t just core a new hole. I’ve found a few bits but nothing I can get over the counter at a merchants. Cheers folks
Hello
The existing tap is leaking in the kitchen. Few days back, it randomly let out more water than what it was leaking before and it created a mess.
Need some help on replacing a old kitchen tap.
Here are some pictures for the old tap and new tap that we have in kitchen. I have also...
Hi,
I live in a bungalow and I am refitting my kitchen/diner.
The existing radiator needs to be moved to the other end of the kitchen and replaced with a vertical radiator which I have just bought.
I can do some DIY plumbing myself, but need some advice.
I could reroute the pipes from the...
Hi,
I bought a Grohe kitchen tap to replace my existing one and have found that it comes with fixed flexi hoses that are 3/8" instead of the UK standard 15mm fitting.
I saw on an older thread that someone with a similar problem bought a tap tail adaptor from Screwfix with a compression nut and...
6 years old. Never a problem until it sprung a leak recently. Took the solenoid apart, cleaned things up, put it back together and no more leak.
So that is not the issue. In fact, there is nothing wrong with it now but I would really like to understand how the darn 'touch' 'off' toggle works. It...
Hi, I've been trying to fix a leak from under the kitchen sink. I replaced a number of components and fixed one leak from the trap, but now have another leak from the join to the waste pipe. See below (1).
I have 2 different types of pipe (2 & 3) and not sure how to connect them to a tight seal...
I was wondering has anybody ever come across a value like this:
It's 30 mm wide at its widest but narrower at the bottom. It is from the hot side of a kitchen mixer tap. The cold side was the standard size. I've been to my local plumbing suppliers and the likes and nobody has ever seen one like...
Hi
We had a new kitchen mixer tap fitted back in October, it was highly rated on tool station and not a bad price.
I noticed yesterday that the part in between the tap handle and the body (in the photo) seems to have come off or something odd has happened so it’s showing the inside connections...
We live in an upstairs maisonette, and currently have a kitchen/living area, with 4 units. We are doing a loft extension and the kitchen/living area will become a kitchen diner. However, we will need to move the kitchen to the other side of the room. The kitchen pipes currently go straight out...
Hi all,
I'm having problems with an old kitchen mixer tap.......the cold side is dripping from spout so I attempted to remove the brass cartridge to change rubber washers but for some reason after fully unscrewing it doesn't want to come out. Maybe something simple stopping it but I didn't...
I have just had a new kitchen sink installed, and the plumber filled it to the top and told me not to use it for 48 hours to ensure the sealant sets. Told if we use it beforehand, it could move. Is this correct sounds like a long time for the sealant to set.
Just looking for some advice, I have just fitted a new kitchen sink and both water pressures are the same in hot and cold on the mixer tap, both connected to tap flexies with shut off valves, however when hot is turned on it is not turning on the hot water for the boiler, previous sink had...
I bought a Hozelock tap to hose fitting, though it doesn't fit the tap.
The diameter appears to be 22mm.
I desperately need a fitting for a hose to water some plants, as running back and forth with a watering can seems so unnecessary.
Can anyone point me to what I'm looking for...
I’m looking to get some advice on how to remove a stubborn kitchen tap.
The sink is ceramic and I’m very reluctant to take a grinder or any power tool to the tap. The fixing plate is secured by a plastic nut. Not a brass nut. You can fit a box spanner over the plastic nut, but it doesn’t...
Hi everyone,
Finally I have figured out what the two stop cocks in the kitchen do as they both had to be replaced due to leaks.
The one under the sink stops the cold water from coming into the kitchen tap and the one which is in the wall panel is connected to the incoming mains water and needs...
Hi guys installed a outside garden tap seemed to go well until I went back to the kitchen only to find I have no cold water now the hot water works fine and upstairs is normal hot and cold except for kitchen I'm baffled what's going on please help
Thanks