Anyone come across gurgling condensate traps on boilers? When the condensate line is tee'd in to the kitchen sink waste? Have managed to stop it by installing a inline aav adapter on the trap. Anyone else noticed this.
Evening all,
Basically my question is how deep must a 15mm copper pipe be inserted into a push fitting for it to function properly without leaking? I Bought this Tap Tail Adapters from Toolstation this morning and I am wondering if they are deep enough. I tried to install a new mixer tap this...
Hi. I am having a new kitchen designed and installed and need some advice about whether what I wish to do would work well enough.
Currently my freestanding washing machine is in the corner of my kitchen, next to an outside wall. The plumbing and standpipe are right next to it, so it all works...
Hi I replaced my hot and cold tap tonight cause the cold tap couldn’t turn the water of tap was just spinning. Fitted fine with no leaks. Now I have a leak coming from the middle bit where the chrome threaded ring is. Do I need to tighten the chrome threaded bit up in the middle to stop the leak...
Hi There
Moved into a new build recently. Noticed that when I turn on the cold tap in the kitchen a pump in the attic seems to activate which would indicate that the cold tap in the kitchen is not fed directly by mains (however i am not a plumber so could be wrong)
Prior to noticing this pump...
Hi. The cover has come off the overflow pipe on my kitchen sink. It was looking very tarnished anyway, so needs replacing. Can I buy any cover or does it have to be a certain type?
I have attached a photo of the overflow in question. Many thanks Rachel
Hi all,
Noticed a leak that comes from the side drainage, not the main part of the sink.
Hopefully pictures make it clear.
Is this a fix I can do myself, e.g. with sealant? Or will this need new parts/plumber intervention?
Thanks as always for your help.
Martin.
Hi everyone.
A slight conundrum im hoping to get some educated advice on from people who actually know.
Ill be having the whole of my downstairs dug up in order to install insulation (none present) with a 75mm screed on top. Ill then have a wet system underfloor heating installed. My...
My pull down kitchen faucet seems to be leaking from the short hose that is connected to the pull down hose only when I turn on the hot water. Do I have to change the whole faucet because I don't see anyway of opening the faucet to access the hose
I have lived at this house for over 10 years and it has been interesting keeping things working.
The latest issue is a weeping kitchen mixer tap. Probably been gently weeping since I moved in but always blamed the slight damp on somthing else. Took it apart and look what I found. Standard tap...
I need some advice…
Our gas meter is currently in the garage conversion and runs under the stairs into the kitchen where we have the boiler. We want to do the following things:
1. Replace with a combi boiler and move to the loft. We are a semi detached house so need to the pipes run up from the...
I live in pattaya, thailand. just moved into a condo. a few days after moving in, I started smelling sewer gas coming from underneath my kitchen sink. I asked the landlord to fix it. but he has ignored me for a week now. so, I'm thinking I need to resolve this myself or move out. mind you...
My kitchen sink drain became blocked and, while unblocking it with a plunger and lots of water, I saw the dirty water leak from behind drywall about 6 feet away from sink. I had previously noticed a smell from the same area and dampness on the drywall.
So I cut open the drywall and find an open...
Been asked to wire up gas valve in pub kitchen and all the gas fitter has left is a stop button, when I wired many of these for a catering firm years ago there was a control box witha current sensor that worked with the fan. What are the current requirements?
Is there a minimum height betwwen a...
Anyone coming across these tap fixing components. I'm struggling to find a box spanner to fit. The nut is about 33-34 mm between flats. New install and as far as I can see nothing apart from a box spanner will tighten this. Unless you have the opportunity fit before installing sink.
hi
as our separate hot tap is dripping contacted Bristan to ask what washer to get as heard that depending on date bought, washers either rubber or fibre. Bristan said that they do not supply individual washers but only complete valve assemblies. sure that I have seen Bristan washers on the...
Hi,
I'm planning on putting in a Kitchen Island with a sink. I've not got an easy route out to the side all where the SVP is situated. The SVP runs down the side wall and under the block and beam floor in the kitchen.
Would it be possible to run a 110mm pipe from the island under the floor to...
Came across a tricky job last Friday.gravity fed vented hot water cylinder that is pumped via twin impeller pump.also cold from tank is pumped with same pump.pump is upstairs.feed for bar mixer shower pipes go up into loft and drop down into the shower area.cylinder up stairs.would shower run...
Hi. DIY guy here, not a plumber of any experience.
I would be grateful for constructive critique of the drainage design presented by this diagram, accompanied by the following notes and questions:
1) On the left is dishwasher, on the right is washing machine. Purple lines represent standard...