Having issues with the boiler making a arcket when hot water/heating running, sounds like combustion needs resetting as it runs perfectly for 10 minutes then error E comes up and flame symbol. Boiler restarts and runs perfectly again until next time which could be never or 30 minutes
Service...
I have clients who live in a small cottage. Originally the kitchen was at the front of the house in one of the 2 rooms, the bathroom was upstairs at the back of the house and was fed by gravity hot and cold. At some time in the past a small extension was built at the back and the kitchen was...
Hi all,
I've been asked to modify the water supply to a hotel.
The front of the old hotel is connected to the water mains in front of the hotel, and the rear extension backs onto a different street and has an other water main serving the back only.
So can I simply connect the pipework inside...
Our house has a grundfos home booster pump due to narrow victorian pipes in our area.
We have been getting recurrent air locks over the past few weeks. After a grundfos engineer review, there is no inherent problem with the pump but the pressure of the mains water pipe refilling the water...
Hi, I've been speced a 45oltr TWS Mains Boost Plus for a client based on a 250lt unvented cylinder and 4 bathroom, 4 storey residential property.
Has anyone got any experience or reviews on this system and how effective, any problems e.t.c?
Any thoughts would be really appreciated?
Thanks
James
Is it better to go directly from the mains for a water filter tap or from the cold water running into kitchen tap. Is it cleaner from the mains line and ready to drink quicker?
The water line runs from the main to the tank upstairs and back again for the rest of the house. Also splitting from...
Hi all, recently noticed boiler pressure (Baxi 105e) was at 0. Topped it up to the boilers recommended 0.5 bar cold , still dropping. Went around the house and found two leaks on radiators, one at a blanking plug, one where water feeds in/out of radiator. resolved them both, great.
It seemed...
When upgrading the mains do thames water upgrade from the stopcock on the road to the house (pre laid pipe) or do they upgrade the communication pipe from the main supply to the stopcock and from the stopcock to the house?
Im thinking if you upgrade the water mains to larger pipe size are...
Hi could anyone help me out, i need stopcock replacing it looks like 15mm soldered to stopcock plus also has compression nuts...cant find one like this anywhere
Hi I have a strange looking mains water isolator side my shop. I need to turn it off. Can someone shed some light on which tool I will require to do this.
Ive been asked to run a mains feed to feed a tea cabin in a courtyard behind a shop. Its on land being leased from the shop which has the mains water supply. They want me to tee into their supply underground and run the new pipe to the new tea cabin. It will involve digging a trench across a 3m...
My customer has a problem with red silt coming through the mains water. He lives in an apartment on the second floor by a marina.
He has asked for some type of filter to be fitted to the mains next to the stop tap.
I am also to fit a salamander homeboost pump as he is only getting 8 litres...
Hi
I'm a householder after some advice if possible please. I have a vailant eco tec 631 R1 boiler powered by a grasslin towerchron qe1 timer/power supply that is plugged into a switched mains socket
We need to turn the power off in the house to do some work but I am concerned (because the...
Hi - just installing my own Baxi duo tec 40 as have had new water mains supply and water pressure is very powerful. On installing I noticed in the manual it says there is a flow restrictor built into the cold water inlet tail nut which connects onto the jig - my question is why would they...
Hi,
sorry another question, im replacing my cold water tank and was wondering if there are any reasons not to switch the upstairs cold water taps to mains water rather than an indirect tank feed. The cold water tank feeds 2 taps and a shower. I have a mains pipe very close so would not be a big...
Hi
I have a Valiant boiler eco TEC Plus with a Mega flow and Boss expansion tank.
I am not a plumber but just a practical guy and its Christmas !
The local water supply was broken with a major pump breaking don on Chrismas Day. Large area effected with no water supply. I tried running taps but...
The cold mains is in 22mm copper on a pipe run to to a bath and basin taps next to each other. The mains water is 4 bar static, no PRV or check valves. The bang happens seconds after the cold tap is turned on at either the cold bath or basin tap. There is a 0.5 litre potable water expansion...
I am going away for the winter
Have a traditional Heating system F&E system. 2 Tanks in the Loft one Large cold water and the small one I presume is for the central heating. and a water cylinder in the Airing Cupboard down stairs and a Valiant Boiler down stairs both located in the kitchen...
Just wondered if i can chlorinate a new installation of 63mm pipe myself and put the relevant certificate on it. I have already chlorinated it and pressure tested it but i am struggling to find the right way to email the info to united utilities. I am a qualified Plumber but just not very clued...