Advice on waste connection for bowl sink

[FrankW]

Hi,

I need some advice connecting my bowl sink to the waste. There was a Insinkerator installed that I have replaced with basket strainer waste (Viva PP0011).

I need to connect the waste but I find myself going around in circles in regards to selecting the correct parts.

Thanks

FrankW

 

[fowlerboi]

I need a picture of the whole lot. Both sides.

 

[FrankW]

I need a picture of the whole lot. Both sides.

The other side.. something to note is I am planning to install a dishwasher so I will need to add an additional appliance waste connector.

 

[fowlerboi]

Could do with a photo of both from the front to gauge distance apart but I would expect you need one of these.

Could I have a measurement between the 2 basket strainers

https://www.NoLinkingToThis/p/mcalp...PNCniyA76oTmjg-R7y4aAkecEALw_wcB&gclsrc=aw.ds

 

[ShaunCorbs]

Mcalpine asc10 and see what fittings you need might just need a elbow

 

[FrankW]

Distance between baskets is 235mm (center to center).

 

[ShaunCorbs]

McAlpine Trap Kit

• Available with 1 or 2 nozzles to accept discharge from domestic appliances• Suitable for almost all British and European sinks• Supplied with an 1½" x 75mm water seal tubular swivel 'P' trap• Multifit Compression Outlet suits all plastic, copper and lead pipeCan accept discharge hose of a...

www.toolstation.com

 

[FrankW]

Thank you for the advice. I will look into this and report back my results.

 

[FrankW]

Thank you for the advice. I will look into this and report back my results.

Done. Thanks!

 

[ShaunCorbs]

Don’t forget to cap the unused washing machine points with the blue caps if you haven’t already

 

[FrankW]

Don’t forget to cap the unused washing machine points with the blue caps if you haven’t already

Yeah they are fitted inside, thanks. No leaks 🙂